UNSOLVED

rotkaetzchen

updated

19 years ago

0

39565

September 27th, 2007 19:00

2407WFP-HC, vertical yellow lines and blue horizontal ones

i think i got an issue about my dell monitor. bought it one week ago. on the second day the monitor showed this little yellow lines. it was shown on websites, on my fotos etc. the blue ones were horizontal across the backgroundpicture. i also have the green shades in some cases and the shadowing/ghosting issue, too. additionally the display is really greenish allover when i start it. after a while it's okay. i use it as a second display for my new aluminium 24" iMac. they are both on the adobe rgb profile, and the dell is on the mac modus (i changed the rgb by myself a bit)

this is my unsolved problem:

http://www.apfeltalk.de/forum/dell-ultrasharp-2407wfp-t98681.html

the "effect" (yellow and blue lines) came spontaneously and was away when i turned it off and on again. the green-problem at starting stays.


what do you think?

excuse my poor english. if you didn't understand what i meant, please ask again, i will do my best. thanks for your support!
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    667

    0

    Posted September 28th, 2007 11:00

    rotkaetzchen,

    Please test using both the VGA and the DVI. Any difference?


    DELL-Chris M (old account)

    #IWork4Dell

  • 667

    0

    Posted September 28th, 2007 12:00

    hi chris,
    would do that of course, but my imac doesn't have a vga and i don't like to pay once more for an apple adapter which i don't like to use in the future, cause the dvi signal is the better one. don't know if it makes sense to convert a digital input to an analog and this again back to a digital image?
  • 667

    0

    Posted September 30th, 2007 07:00

    I do have the exact same issue here. The HC is from a Czech production.
    Switching off and on again will help but still this annoying. Seems like the display is getting problems during warm-up.

    I will try to test with VGA, but this will take some time.
  • 665

    0

    Posted September 30th, 2007 09:00

    Yap, TangoSWillaims, mine is from Czech Republik, too. Please post something if you've got experiences with VGA. maybe it's a dvi-cable issue or something. how often did this happen to your display? is it regularly? i will note it, when it happens again, too, so we maybe have a little summary of the problem.
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    665

    0

    Posted October 1st, 2007 18:00

    Both of you,

    Please provide me with the following information in a private message, not on the board -
    Name:
    Shipping address:
    Phone:
    Order number and/or Service tag number:
    20 digit PPID number on the back of the monitor:
    Reason: 2407WFP-HC vertical yellow lines and blue horizontal ones


    DELL-Chris M (old account)

    #IWork4Dell

  • fallbayuk

    6 Posts

    665

    0

    Posted October 3rd, 2007 10:00

    I also seem to have this problem. My screen is a CZ product too. I've put some pictures in the following thread:-
     
     
    Should i do the same and private message you Chris with the details?
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    665

    0

    Posted October 3rd, 2007 11:00

    fallbayuk,

    Nope. Just hang tight and check this thread for any updates.


    DELL-Chris M (old account)

    #IWork4Dell

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    665

    0

    Posted October 5th, 2007 11:00

    All,

    Please provide the video card, driver version, and video acceleration settings.


    DELL-Chris M (old account)

    #IWork4Dell

  • 665

    0

    Posted October 6th, 2007 11:00

    hi chris! as ia m using an apple (new 24" aluminium g5) it's not possible to adjust any settings of the graphic/videocard. here are the specs out of the system profiler:

    ATI Radeon HD 2600 Pro:

    Chipsatz-Modell: ATI,RadeonHD2600
    Typ: Monitor
    Bus: PCIe
    PCIe-Lane-Breite: x16
    VRAM (gesamt): 256 MB
    Hersteller: ATI (0x1002)
    Geräte-ID: 0x9583
    Versions-ID: 0x0000
    ROM-Version: 113-B2250F-212
    EFI-Treiberversion: 01.00.212


    i asked some people, they told me, it's only possible to pimp or change settings of the card, if bootcamp is installed. but i don't need windows, so i can only tell you that i am using the apple specific settings. and i don't know them. sorry :(

    Message Edited by rotkaetzchen on 10-06-2007 02:52 PM
  • fallbayuk

    6 Posts

    192

    0

    Posted October 12th, 2007 19:00

    Video Card: Radoen 9800 Pro
    Driver: Catalyst 7.9
    Video acceleration: FULL and also the next step down. Have not tested any other settings.