UNSOLVED

loosecannon_840

updated

22 years ago

0

13267

January 5th, 2005 18:00

2001FP with DVI and stuck at 1280x1024@60Hz

Laptop: IBM ThinkPad A31p, docking station with DVI, WinXP
Video Card : ATI Mobility FIRE GL 7800

Usage: Laptop set to 1600x1200@60Hz and I am using the 2001FP as an extended desktop.

Problem: Using the DVI connection, the 2001FP will not go to 1600x1200@60Hz. When I change the resolution to 1600x1200@60Hz it only goes to 1280x1024@60Hz. This is the highest it will go. All lower resolutions below 1280x1024 work.

Done/Tried: Latest drivers for
1) Dell 2001FP(Digital)
2) IBM ThinkPad IPS 1600x1200 LCD Panel
3) ATI Mobliity Fire GL 7800
4) Latest BIOS for ThinkPad
5) Adjusted all/most settings in WinXP for setting up Multiple Monitors
6) Adjusted all/most settings for 2001FP OSD

Other Notes: VGA cable works fine in 1600x1200@60Hz.

Thanks,
-- cjn aka loosecannon_840
  • matneh

    10 Posts

    193

    0

    Posted January 7th, 2005 16:00

    loosecannon_840,

    I had exactly the same issue as you with a Thinkpad T30. Here's the solution:

    Go to http://www.omegadrivers.net/ and download the "Omega" ATI drivers. They are a modification of the latest ATI drivers that will work with laptops. IBM's version of the ATI drivers seems to restrict DVI to 1280x1024. I think there was some issue with some Thinkpads that the DVI quality was poor above that resolution, so they restricted all DVI to 1280x1024.

    I have a T30 with a 2005FPW, and after uninstalling the IBM ATI drivers and installing the Omega drivers, I can now use the full 1680x1050 resolution of this beautiful monitor through DVI.

    Hope this helps,
    Matt
  • 193

    0

    Posted January 7th, 2005 18:00

    Matt you are a PIMP. Thanks for the tip the monitor is running 1600x1200.

    Thanks again.

    -- loosecannon_840