UNSOLVED

nathan.perkins.

updated

12 years ago

1

106902

April 13th, 2015 17:00

Video and mouse lag with M3800 in Windows 7

Hello,

I deployed three M3800s with Windows 7 64-bit with D3100 USB 3.0 docks. They have two Dell monitors connected to the docks with display port and HDMI. There is a ton of lag and poor refresh rate on the monitors and on the laptop. When the dock is disconnected, the refresh rate and lag issues go away. When I connect the laptop back to the dock, the issues return. Even when we connect the monitors directly to the laptop through mini displayport, there is a ton of lag.

We have two near identical setups but with Windows 8.1 instead of Windows 7. The laptop runs Windows 8.1 with no issues.

I have updated these computers to the latest video drivers but still have continued issues. Is there any guidance for this?

Thanks,
Nathan
Ubisoft Entertainment

  • louwill

    3 Posts

    678

    0

    Posted April 14th, 2015 07:00

    I'm experiencing similar behavior for my M3800 I just received last week.  Windows 7 x64 and D3100 dock powering two P2411H 24" displays connected via HDMI -> DVI.  I have a pair of U2515H displays on order that I'll try to connect via DisplayPort.

    The lag is noticeably less on the laptop display than on the external monitor displays when connected to the dock, however.  No perceived lag when using the laptop by itself when disconnected from the dock.

    I've updated all drivers from Dell support.  I even tried using the K1100M drivers from nVidia.  Please update this thread if you find a solution.  I will do the same.

  • 678

    0

    Posted April 20th, 2015 05:00

    Same here with new Dell Precision M3800 with Windows 8.1.

    Besides the annoying Windows display scaling problem I now have to deal with these mouse lag problems as well.

    I can't believe that Dell sells this product as a reliable docking station for the M3800 (besides the fact that it's a port replicator only and not really a dock, as it does not power the M3800).

    Maybe I should have gone with the ThinkPad W550s instead, I was thinking about when deciding for Dell...

  • louwill

    3 Posts

    678

    0

    Posted April 20th, 2015 08:00

    I did some more testing and can confirm it's the D3100 replicator.  If I disconnect the display cables from the replicator and attach to the laptop itself, the lag is 100% gone.  Right now, I have two P2411H displays hooked up.  One is attached via HDMI -> DVI and the other is attached mDP -> DVI.  I have two U2515H displays on order, which I'll have to daisy chain via mDP and bypass the D3100.

    We have a separate problem with the M3800 -- ghosting/burn in.  We ordered four of them and mine is the second one to have a problem in less than a week.  I have the IZGO 4K display.  Did Dell even perform any testing on these machines?

  • 678

    0

    Posted April 21st, 2015 02:00

    No ghosting/burn in so far for me with the M3800.

    But I noticed another issue with the D3100 - my Plantronics USB headphones only work when connected directly. When connected to the dock they are not recognized.

    Any chance that Dell support will comment here on the mentioned issues?

  • louwill

    3 Posts

    678

    0

    Posted April 24th, 2015 13:00

    IZGO panel replaced today.  So far we're two for four M3800s needing to replace the display.  Burn in got worse over the last week on mine.

  • NukeMike

    2 Posts

    678

    0

    Posted June 3rd, 2015 14:00

    I have a similar issue with my M3800 and D3100 docking station as well. 

    Just curious to know if there were any other solutions other than switching to Win8.1 or bypassing the dock?