
UNSOLVED
Closed
J
justincredibleh
13 Posts
0
3748
January 20th, 2007 23:00
Suggestions for Replacing Broken Screen
Last night one of my friends stepped on my laptop. It now appears like a broken windshield when you turn it on. It is not under warranty and I'm wondering what options I have for replacing it.
Any suggestions would be great.
Thanks,
Justin
Responses (3)
Solutions (0)
justincredibleh
13 Posts
242
0
Posted January 21st, 2007 15:00
Thanks for the suggestions. Would you recommend me replacing the screen myself, sending it in to Dell, or finding a computer business to help me out? Here is the info on my computer; what do you think I'll need to buy (I'm going to buy a new one) and how much will it cost?HD993 ASSEMBLY, CABLE, COAXIAL, LIQUID CRYSTAL DISPLAY, 15.4, 6K, Wide Extended Graphics ArrayND808 LIQUID CRYSTAL DISPLAY, 15.4WXGA, VIDEO ELEC. STDS. ASSOC., SAMSUNGY5995 BEZEL, PLASTIC, LIQUID CRYSTAL DISPLAY, 15.4, NOTEBOOK, 6000F7970 ASSEMBLY, ADAPTER, ALTERNATING CURRENT, 65W, LEAD FREE, LITEONG5845HINGE, COVER, PLASTIC, INSPIRON, 6000M4185PROCESSOR, 80536, PENTIUM M DOTHAN, Pentium M Dothan, 1.86GHZ, 2 MEGB, 533FSB, PLASTIC GRID ARRAY, C0H5639KEYBOARD, 87, UNITED STATES, ENGLAND/ENGLISH, SINGLE POINTING, SULLIVAN/TOBAGOF2951KIT, CORD, FLAT, 3F, D3W/3P, PROPOSITION 65, UNITED STATESF5132BATTERY, PRIMARY, 11.1V, 6C, LITHIUM, SONYCC753ASSEMBLY, COMPACT DISK READ WRITE/DIGITAL VIDEO DISK DRIVE COMBO, 24X, PHILIPS, SULLIVAN/TOBAGOGD296CARD (CIRCUIT), GRAPHICS, 64MB, I6000, M22, SURFACE MOUNT8267RCONNECTOR, HEADER, 2X22, FEMALE, 2, S, G, 35K, THIRD HEIGHT, CHIP SETUF414ASSEMBLY, BASE (ASSEMBLY OR GROUP), BOTTOM, DISCRETE 6000, DELL MEDIA DIRECTT8429HARD DRIVE, 60GB, 9.5, 5.4K, LEAD FREE, FUJITSU, ZEUS 60 HDDT1613KIT, SOFTWARE, OFCBSC-2K3, ORIGINAL EQUIPMENT MFGR., ENGLAND/ENGLISHUF650KIT, SOFTWARE, TREND MICRO, 12, ENGLAND/ENGLISH, DELL AMERICAS ORGANIZATIONY8029CARD (CIRCUIT), WIRELESS, MINI PCI CARD, 1370, BROADCOM CORPORATION2Y5522DUAL IN-LINE MEMORY MODULE, 512MB, 533, 64X64, 8K, 200
Any help would be great. Thanks again.
Justin
- The labor to install should be less than $100; the screen itself will be about $500. Unless you know how to do the job, there is a probability you will break the new screen when you install it; since you're looking at a minimum of $500 anyway, I'd have it replaced professionally unless you're sure you can do the job without breaking the panel or damaging the system.

ejn63
11 Legend
•
87469 Posts
•
321256 Points
242
0
Posted January 20th, 2007 23:00
The used on carries the risk that you have no idea how many hours are on the backlight.
If you get a different model panel, you will need the inverter for it as well.