
UNSOLVED
Closed
T
tominflorida
2 Posts
0
6808
February 4th, 2006 14:00
s-video from laptop to dvd player to tv
HI,
I connected the s-video cord to my dvd player which is connected to my tv but the dvd plays on the laptop, Inspiron 6000, but not on the tv. I tried all kinds of things but nothing seems to work. Someone at Dell said it must be connected directly to the tv but I figured I would try asking someone else first.
Thanks for your help.
Cheers!
Tom
Responses (3)
Solutions (0)
I have a similiar problem. I connected my Inspiron 2600 VGA output to my TV S VIDEO input and to my TV RCA VIDEO input using an adapter, and I cannot get it to work. I used several procedures that I obtained online, but still cannot get it to work. I have read on one forum that your laptop video card must be compactable with your TV S VIDEO. My laptop does not have a S VIDEO output, only VGA. My video card information is as follows:
Video Type - direct AGP integrated graphics
Data Bus - UMA
Video Controller - Intel 830 MG
LCD Interface - SPWG
I really do not know what all this means. If you could assist me, it would be greatly appreciated.
tominflorida
2 Posts
176
0
Posted February 20th, 2006 15:00
HI,
Did you go into the control panel and play with the display options. You have to locate the Intel graphics tab, then go into advanced and that is where you get the choice of screens. I chose the laptop/TV screen so I can see it on both.
Play a dvd on the laptop, then minimize it, then go into the control panel and click on display. Click settings, then click Intel, then click advanced then choose the screen. If you do not get a choice of screens, plug and unplug the s-video out cord from the laptop. Mine goes crazy sometime, but eventually I got the thing to work.
Good Luck!
Tom

Atomic Fusion
47 Posts
176
0
Posted February 16th, 2006 03:00
I connected the s-video cord to my dvd player which is connected to my tv but the dvd plays on the laptop, Inspiron 6000, but not on the tv. I tried all kinds of things but nothing seems to work.
The S-Video port on your DVD player is output only. It does not accept input. If you do not have an s-video port on your tv or vcr, then you need to buy an s-video to RCA adapter cable/unit. I recently bought one off ebay for 99 cents, and it works great to output my computer to anything that has an RCA input port. I just have to initialize the s-video first with my camcorder's s-video input...
Hope it helps...