
UNSOLVED
Inspiron E1705 Videocard Downgrade GO7800 > X1400
Dear Dell,
I have been a loyal dell user since 2001 and bought 20+ machines from Dell ever since (laptops, desktops, servers, etc)
I currently have a problem with a laptop (Inspiron E1705) I am trying to fix.
Scenario.
a) Took the laptop apart in order to clean the dust out. The videocard (GO7800 256MB) heatsink was clogged with dust.
b) Once cleaned I put the laptop back together to experience that it was displaying vertical lines and visual errors. I hooked up a VGA but that showed the same problems. Resulting in blaming the videocard and declaring it defective. I read that the GO7800 is a very unstable videocard...unfortuntely.
Update.
a) I ordered a new videocard from Hong Kong. The ATI X1400 (128MB) in order to resolve the videocard problem.
b) The VGA now works fine showing a nice clear picture but the laptop LCD (1920x1200 WUXGA) now shows a bright white blank screen.
My questions:
1) Is the GO7800 truly dead?
2) Do I need to update the X1400 bios to make it work with the heavy LCD screen? Or is the LCD connector port damaged.
Any help will be highly appreciated.
Responses (2)
Solutions (0)
Hi Seroyan,
Thanks for replying
1) I tried reinserting the GO7800 many times, cleaning the connectors all without luck. I read on forums that the vertical lines are a common problem with a defect GO7800
2) Thanks I will try to clone the vga to the lcd. But the already tried different resolutions as a second screen all without luck. But I will try again tonight.
Thanks for your advice.

seroyen
34 Posts
305
0
Posted April 2nd, 2009 09:00
Hi reformatt,
1) Did you try to take out and re-insert the Go 7800? It sounds more like a problem with the connection between the card and the motherboard rather than the card itself.
2) I had this problem before when my laptop LCD showed a white blank screen because it was not receiving any display signal from the motherboard but receiving power for the inverter. You can try plugging in an external monitor to VGA, and select clone display mode @ 1024 x 768 for both the laptop display and external display and try to increase the resolution each time. If your laptop display works at that resolution, it is probably a driver issue or the BIOS issue as you mentioned.
Hope this helps.
Seroyen