UNSOLVED

yamez224

updated

20 years ago

Closed

Y

yamez224

8 Posts

0

19983

July 25th, 2006 18:00

Inspiron 8200 won't turn on :(

My Inspiron 8200 decided not to turn on yesterday.  I didn't drop it, spill anything on it, or anything else.  I had it in hibernation during the day as I usually do, and it wouldn't start up when I got home from work.  The only unusual circumstance I could think of is that it has been particularly hot.
 
When I press the power button, the first two green "device status" lights come on (i.e., power is on and it's reading/writing data).  The caps lock light blinks for a few seconds and then everything powers back down.  Nothing else--nothing on the screen, cd/dvd drives don't spin up, no fans, nothing.
 
I've had this thing since the fall of 2002 so it's way past warranty.  I was really happy with it, though, and was waiting to upgrade until windows vista came out.
 
Is it dead?
  • Irish2005

    134 Posts

    650

    0

    Posted July 25th, 2006 18:00

    When you turn it on how many times to the NUM - CAPS  - SCROLL lock blink? its giving you a code you just didn't know it.

    If the caps lock blinks just once and no other light blinks (Lights up) you probably have a failure on the motherboard.

    Good Luck

     

  • yamez224

    8 Posts

    650

    0

    Posted July 25th, 2006 18:00

    I was wondering if that was the case, but I didn't see anything in the manual about it.  I know it's more than once--it goes for several seconds before turning off.  I also know it's just the caps lock light, no other "lock" lights come on.  I'll have to check tonight after work to count.  Thanks for the tip.

    Has anyone seen a webpage that will translate the blinks once I count them?  I just looked but couldn't come up with anything.  Thanks in advance!

  • Irish2005

    134 Posts

    650

    0

    Posted July 25th, 2006 19:00

    I have looked also but could't find anything. I know you can give Dell a call to verify that is the problem. I have done the before and they can tell me what I would need to purchase.
     
    I'm going to talk to my Dell rep and see if I can get anything about this type of issue. I would like a doc on what the lights mean no matter what they show.
     
    thanks
     
  • Irish2005

    134 Posts

    650

    0

    Posted July 25th, 2006 19:00

    My Rep is sending me stuff so try this. It should get in to a Diag on your system board (If your system has it) then you can run some tests to see what the issue is.
     
    Power + Mute Button
    or F12 => Diags
  • yamez224

    8 Posts

    650

    0

    Posted July 26th, 2006 01:00

    Ten blinks.

    I'll try your other suggestions.

    Message Edited by yamez224 on 07-25-200609:45 PM

  • yamez224

    8 Posts

    650

    0

    Posted July 26th, 2006 12:00

    Got to the diagnostics screen only once, and everything seemed okay. It has turned on twice now (I've tried dozens of times), but the first time the screen went blank as I was heading to this page. I had to hold down the power button to restart, and the problem returned.

    The second time, now, it turned on just fine again. But I'm not at all confident this problem won't return...

    Any ideas?
  • Irish2005

    134 Posts

    650

    0

    Posted July 26th, 2006 12:00

    I got this from Dell....
     
    Latitude C840 / Inspiron 8200

    The Latitude C840 / Inspiron 8200 features the new 7-page BIOS at RTS.  

    The following keystrokes have functionality during post:

    KeystrokeFunctionality F2 or
    Fn + F1Enters BIOS menu F12Brings up One Time Boot Menu Ctrl-Alt-D90/90 Hard Drive diagnostics

    90/90 Hard Drive Diagnostics When at the BIOS POST Splash screen, the pressing of the Ctrl+Alt+D will execute a series of Smart Drive commands to attempt to find any issues with the drive(s). This diag information is returned as passed or failed. If failed, an error code number is returned that defines the issue and drive type.
    Note:  After running the 90/90 diagnostics, the system must be powered down and rebooted to ensure a clean boot is performed.

    BIOS LED Codes

    The BIOS utilizes LED codes for diagnostic messages which will prevent the system from booting.

      LED Code    Binary Translation   BIOS Error This Image illustrates the Latitude C840 / Inspiron 8200 BIOS 1-1-1 flashing code 1-1-1
    (flashing) Processor Not Seated This Image illustrates the Latitude C840 / Inspiron 8200 BIOS 0-0-1 code 0-0-1 Processor Failure This Image illustrates the Latitude C840 / Inspiron 8200 BIOS 0-1-0 code 0-1-0 Motherboard Failure This Image illustrates the Latitude C840 / Inspiron 8200 0-1-1 code 0-1-1 Memory Failure

     

    Sounds like your motherboard is shot.

  • speedstep

    11 Legend

    •

    46969 Posts

    650

    0

    Posted July 26th, 2006 13:00

    Take out the battery.
    See if it acts differently.

    Bad ram or loose ram could also be a problem.
  • yamez224

    8 Posts

    650

    0

    Posted July 29th, 2006 01:00

    Pulled out the factory original ram and it seems to be functioning correctly now. I had been running one generic 512MB ram with one of the two original Dell 256MB rams, so I took out the remaining Dell ram. I also swapped sides, so I'm not sure which it was (the ram or the slot), but the 512MB ram seems to be working where it is now.

    Thanks for all your help. Now maybe I can make it another year or two before replacement! Cheers.