UNSOLVED

wei chian

updated

22 years ago

Closed

WC

wei chian

12 Posts

0

15610

July 4th, 2004 11:00

How can I have my HDD partitioned without formatting it again?

Hi, guys, my Dell Inspiron 600 m with Win XP Pro is actually a new system. And I don't really want to waste my time to re-format the system again for partitioning my 60 GB HDD into four, 15 X 4, C:, D:, E:, and F:. Does anybody know how to partition a system using MS DOS or good softwares without having to re-format it again?

Thanks for your time.

  • rickmktg

    2 Intern

    •

    11898 Posts

    739

    0

    Posted July 4th, 2004 11:00



    @wei chian wrote:

    Hi, guys, my Dell Inspiron 600 m with Win XP Pro is actually a new system. And I don't really want to waste my time to re-format the system again for partitioning my 60 GB HDD into four, 15 X 4, C:, D:, E:, and F:. Does anybody know how to partition a system using MS DOS or good softwares without having to re-format it again?

    Thanks for your time.

    Using the Advanced Forum Search on the left, you'd find this question asked quite often.  Partition Magic is the software that people recommend. 

  • wei chian

    12 Posts

    739

    0

    Posted July 4th, 2004 12:00

    Thanks! All of you are so kind enough, all the best to all of us! In fact, I feel I like Dell more now, since it can give me so good technical support, from Dell itself and all of you. Thanks again!

    Regards

  • Ed C

    2 Intern

    •

    3247 Posts

    739

    0

    Posted July 4th, 2004 12:00

    Partition Magic version 8.

    If you try it with DOS expect to have NOTHING on the HDD when you're done.

  • schmieg

    335 Posts

    739

    0

    Posted July 6th, 2004 03:00

    Ed, what happened with PM 8? I've used the DOS utility a number of times on different machines and it has never harmed a bit of data on my drives.
  • Ed C

    2 Intern

    •

    3247 Posts

    739

    0

    Posted July 6th, 2004 09:00

    When I first got my i8200 I use PM-8 to partitition the 40GB HDD into 3 partitions. I used the original OS install, XP Home, for over a year with NO problems until I decided to put XP Pro on it. I also created the PM-8 floppy boot disks and now I use those floppies to do all partitioning and formatting on new HDD or HDDs i'm going to wipe and reinstall on.
  • schmieg

    335 Posts

    739

    0

    Posted July 6th, 2004 13:00

    Using the floppies for partitions you are going to wipe is probably the best way anyway. About the only thing that can't be done easily with that is the bootmagic installation and, even that can be done.

    I do wish I knew how to set up the Dell Diagnostic partition on a new drive though.

  • Ed C

    2 Intern

    •

    3247 Posts

    739

    0

    Posted July 6th, 2004 13:00

    There was a thread on installing the diagnostic partition and the program on a new drive.

    Here's the thread. I haven't tried it but the poster says it works.

    http://forums.us.dell.com/supportforums/board/message?board.id=insp_harddrive&message.id=33359

  • Ed C

    2 Intern

    •

    3247 Posts

    739

    0

    Posted July 6th, 2004 13:00

    Good luck and post back with what happens.

    I'm considering getting one of those 7200 RPM drives but I'll be going with the 40GB. I did the math and the 40 is .02 cheaper per GB than the 60 and I'll never use all of the 40. I know what you're going to say thats what people said when they came out the 1+GB HDD. But I don't do all that music/picture/movie stuff on my notebooks. In any event I can still use the 40GB 5400 RPM drive in the media bay if I need to.

  • schmieg

    335 Posts

    739

    0

    Posted July 6th, 2004 13:00

    I've seen reports that it does and reports that it does not. We'll find out. My new 60 gig 7200 RPM Hitachi for my I8200 should be in this week.
  • schmieg

    335 Posts

    141

    0

    Posted July 6th, 2004 14:00

    My 40 is getting fairly full, but I don't think I can justify going larger than a 60 on the I8200. I'm going to use the old 40 as a secondary drive on the 8600 to use for backups. Just pop it into the bay, run BackAgainII, and pop it out. Should work fairly well.