UNSOLVED

scode390

updated

23 years ago

Closed

S

scode390

1 Message

0

14959

May 4th, 2004 17:00

D600 Unable to come out of Sleep mode

I have a user who is unable to get the D600 out of sleep mode. All other D600's we have are configured the same way and we just have to hit  the power button to bring them out. For the machine in question, this doesn't work... I have ot eventually hold the button down for a complete power off. The machine power configuration has not been changed by the user either. Any thoughts or tips would be appreciated.

 

Thanks,

 

scode390

  • Fishd

    5 Posts

    267

    0

    Posted May 6th, 2004 08:00

    What's the memory configuration of this machine? Is all the RAM Dell supplied?

    I had this problem on my Dell D600 when using the Crucial RAM picked from the memory configurator. I found a different Crucial part number on this message board and Crucial swapped my RAM for the different type and all has been well since.

    If the memory is Dell supplied perhaps you could try a different stick from another D600 and see what happens, could be faulty RAM.

     

    YMMV.

  • mruseless

    1 Rookie

    •

    16 Posts

    267

    0

    Posted May 13th, 2004 22:00

    I bought Crucial RAM this way, and I have a problem with my D600 not waking up from sleep. However, the sleep issue only occurs every few sleeps, not all the time.

    Can you post the correct part number so I can check mine?

    Thanks,
    Eric
  • lloydw

    2 Posts

    267

    0

    Posted May 31st, 2004 19:00

    Did anyone get to the bottom of this? Was it the RAM? If so what is the correct part number?
  • Fishd

    5 Posts

    267

    0

    Posted May 31st, 2004 20:00

    Sorry, the part number from Crucial that solved my problem is CT6464X265.16F

    That is the part number for a 512Mb stick, it will be different for smaller sizes but Crucial Tech support should be able to help.

    I spoke to Crucial here in the UK and they couldn't have been more helpful.