
UNSOLVED
Closed
PW
Pirate Wade
7 Posts
0
18993
May 24th, 2004 06:00
5150 Video Problems After System Restore
Hi all, hopefully you'll be able to shed some light on this as Dell's tech service hasn't. I have an Inspiron 5150 3.06 ghz with a GeForce FX Go5200 video card on it. I had to do a system restore after having some virus problems. After the restore, and reinstalling all the original software and drivers, any games I try to run will function perfectly fine for 5-15 minutes, but then are reduced to below 1fps or flat out crash. I've tried to install all the different drivers for the card with no noticeable change in performance. I have also checked the settings for the GeForce, but they appear to be as they were before the system restore. Running Dxdiag, it shows no problems with the direct x drivers either. I have never had a problem like this before, even when the computer was very slow and virus infected, and was wondering if any of you have experienced this problem, or know of something to fix this. Thanks much.
Info:
Inspiron 5150
Windows XP - Pro
P4 3.06 ghz
Nvidia GeForce FX Go5200 (current drivers I have installed are revision A02)
Responses (9)
Solutions (0)
Pirate Wade
7 Posts
331
0
Posted May 24th, 2004 15:00
Sorry if I was vague, but that's what I did. I reformatted the drive and reinstalled Windows, and then all the software and drivers the computer came installed with. The computer appears to be as it was when I first received it besides the video problem. Hope this helps. Thanks much.have you tried running dell diagnostic on your computer? if there's nothing wrong with the hardware, then it must be just a software configuration.. if you're afraid that you still have virus, then you can go to trend pc cillin website and use their house call free virus scanner to run a scan on your computer.. let me know what happens.. hope you solve it soon.
have you ran dell diagnostic? you should do that first to determine that your video card is ok..
and as for your driver question, my i5150 couldn't recognise the forceware modified inf by pieters at first so i installed the one dell gave me and upgraded my driver from there and then the computer could be compatible with the video card..
Pirate Wade
7 Posts
331
0
Posted May 24th, 2004 16:00
Nope it's not still a virus problem. I have run house call and have the newest norton on the computer, everything runs fine except for this problem. I got the feeling that it was a configuration or driver issue, but I'm unsure what would cause this and all the options seem to be as they were set before the reformat. I've been playing around with the GeForce settings to no discernable change so far. Thanks for the help so far and if you know of any drivers I might be missing, or settings that might be causing this it would be greatly appreciated. Thanks again.Pirate Wade
7 Posts
331
0
Posted May 24th, 2004 21:00
I've run the Dell Diagnostics. It passes the tests under video, which are svga and lcd tests. There is no test for the video card under it. Still experimenting with drivers and still no improvements.Pirate Wade
7 Posts
331
0
Posted May 26th, 2004 05:00
The power settings are correct and all the drivers from the disk have been installed, including the chipset.- Did you try updating Direct X? It seems you've already gone through many drivers for the video card. I would recommend you to uninstall it one more time and this time try removing all traces of the existing (and even otherwise) nvidia drivers (I think there are utilities for that too...can't remember the name though) and reinstalling a stable version (may not be the latest). Also check for motherboard chipset drivers and AGP/ Fast Write/ Clock Speed setting etc. It can also be due to overheating...try checking temp readings using FanGui after 10-15 minutes of gaming. Hope this helps....Good Luck.

ethanweku
2 Intern
•
454 Posts
331
0
Posted May 24th, 2004 07:00
i'm not sure what's wrong but personally, i don't really recommend doing a system restore.. if i encountered a serious problem that i can't resolve, i'd reformat my computer and start over again, that way current problems are eradicated totally, unless the problem is a hardware one..