UNSOLVED

mug2k

updated

14 years ago

M

mug2k

5 Posts

0

11300

February 7th, 2013 10:00

17R SE 7220 - How do I get my SSD drive to work ?.

I received an SSD I purchased from amazon today but realised I have no Windows 8 DVD, so I'm not sure how I'm supposed to make it my boot drive and put Windows on it if I have no DVD. What are my options ?

  • DELL-Vikram M

    6 Operator

    •

    1071 Posts

    286

    0

    Posted February 7th, 2013 10:00

    Hi mug2k,

    If you just need the Windows 8 recovery disc, you can create one for your computer from Dell Backup and Recovery. Dell Backup and Recovery allows the users to create a copy of the factory image through which you can install the same image on the SSD. The factory image would contain all the Applications and Drivers that was installed on the computer when it shipped out of the factory. To create a copy of the factory image, follow these steps:

    Click the ‘Recovery Media‘ tile.

    Click ‘Factory Backup‘. 

    Select either ‘USB Flash Drive‘ or ‘Discs‘ as per your requirement. Ensure to connect the USB Flash Drive or put blank media into the optical drive.

    Note: If there is no Optical drive in the system, user can attach an external USB DVD writer.

    Click ‘Continue‘.

    Click ‘Start‘, at this point when you are prompted saying that the data would be lost, click ‘Yes‘.

    The factory image gets created on the USB flash drive or disc, click 'OK' once done.

      

    Please share the findings. 

  • mug2k

    5 Posts

    286

    0

    Posted February 7th, 2013 11:00

    The program wouldn't detect either of my 2 USB drives so I restarted the laptop and now the program won't even open anymore, it just crashes.

  • DELL-Vikram M

    6 Operator

    •

    1071 Posts

    286

    0

    Posted February 8th, 2013 16:00

    Hi mug2k,

    I will recommend you to perform a system restore and see if you are able to use Backup and recovery application:

    Note: System Restore does not result into data loss; however all software changes made to the laptop after the chosen 'restore date' will be rolled back.

    - Go to Start screen
    - Type 'System Restore', and then, in the list of results, click 'System Restore'
    - Confirm your 'Restore point'
    - Finish the restore as per the on-screen instructions

    Check if the application works. In case not, update Backup and recovery aplication to make sure it is the latest version.

    Keep me posted. Please reply for any further questions.