
UNSOLVED
XPS 8500 Upgrade to Windows 10
I know that the XPS 8500 is not tested for upgrade to Windows 10 and that some of those that did so anyway found problems with the driver for the 1703 Wireless adapter.
I plan to use this system for several more years and would like to upgrade to Windows 10 before the free upgrade offer expires. I am currently running Windows 7 with all updates installed.
I went to support.dell.com and installed the recommended driver updates which caused my system to blue screen with error code 0x0000000a. I was able to recover from my image backup and everything has worked since.
Has anyone successfully upgraded their XPS 8500 to Windows 10 and if so, what drivers did they install?
Any other tips would be appreciated.
Chip
Responses (14)
Solutions (0)
I agree that the best solution would be too buy a new computer with Windows 10 pre-installed but my XPS 8500 still has plenty of life left and I'm too frugal to junk it.
I have two other Dell computers running Windows 10 and like the changes from Windows 7 so would like to standardize. They are both newer than the XPS 8500 and Dell did test and approve them for the upgrade.
I am still looking for someone who has successfully upgraded an XPS 8500 to Windows 10 to report their experience.
Chip
I upgraded my XPS 8500 with almost no problems. Only the MaxxAudio enhancement disappeared, but this driver solves that:
www.dell.com/.../DriversDetails
Other than that, it all works perfectly fine! I don't understand why Dell doesn't want to support these models though, since they're from 2012 so they're pretty recent still.
Philip_Yip
11 Legend
•
16052 Posts
•
65915 Points
5967
0
Posted March 30th, 2016 23:00
I have updated an XPS 8300 without much problems. The Broadcom Card and Ethernet didn't like the Windows 10 Upgrade too much. In my system I ripped out the Broadcom (Dell Wireless 1501) and put in a superior Intel AC 7260 (WiFi and BT). You can do the same if you have issues.
The XPS 8500 has a UEFI BIOS and should run Windows 10 TH2 64 Bit even better.
Dell didn't release updated drivers for the XPS 8500 however they did for the XPS 8700. The XPS 8700 also has the Dell Wireless 1703 card as a variant and has a Windows 10 driver:
http://downloads.dell.com/FOLDER03113559M/1/XPS-8700_Network_Driver_33H8G_WN32_10.0.0.318_A00.EXE
You are best to upgrade your UEFI BIOS to A12 before Windows 10 TH2 installation. Then you are best to download a Windows 10 TH2 .iso and make a UEFI Bootable USB (FAT32 formatted), Next enable UEFI and SecureBoot (if you are on Windows 7, these should be enabled if the system was shipped with Windows 8.x). Then clean install Windows 10 TH2. Then install the driver I listed.
For more details see:
https://www.youtube.com/playlist?list=PL1RkaknDn7v-Ucth4gt0U3BHVSY7oNkWr
And here:
http://dellwindowsreinstallationguide.com/download-windows-10-oem-and-retail-iso/
I agree that the best solution would be too buy a new computer with Windows 10 pre-installed but my XPS 8500 still has plenty of life left and I'm too frugal to junk it. Ya think? The XPS 8500 is comprised of standard components, all of which have Win 10 drivers available.
I have an XPS 8500, but I haven't used it for a couple of years. I've been meaning to upgraded it to Win 10.
The only installs I have had trouble upgrading to Win 10 were two originally created with Windows 95, and upgraded to Windows 98 and then 2000 before being upgraded to XP, then Vista, then 7.kenclaflin
3 Posts
5967
0
Posted April 13th, 2016 10:00
I upgraded my Dell XPS 8500 to Windows 10 from Windows 7 in late 2015. It seemed to work fine for a while but I started to have problems with Windows Backup and then couldn't update my system. The update program would start to run then disappear. (Same problem with Windows Backup.)
MicroSoft tried to repair my system but failed. They offered me a paid service to guarantee to fix the problem but I declined.
I reloaded Windows 7.
My plan is to install Fedora before MicroSoft stops supporting Window 7 in January 2020.
Ken
kenclaflin
3 Posts
1489
0
Posted April 19th, 2016 11:00
Thanks, sounded like a good idea and worth a try. So I performed a clean install of Windows 10 instead of an update from Windows 7. Everything seems to be working fine even the all wireless devices, WiFi and Bluetooth. But only time will tell. I'll report back in a month.
Thanks!
Ken

Mary G
6 Operator
•
20095 Posts
5961
0
Posted February 18th, 2016 14:00
Driver updates are done after the upgrade since they depend on your operating system. You might not need many updates since win 10 has many available. And the list is not recommended updates--just what is available for all models like yours that are running windows 7. You could have diff hardware. You will not get drivers for win 10 from Dell. You have to depend on the builtin drivers win 10 installs or get win 10 ones from the hardware makers.
An image backup was a smart move. Make sure you have one you can use after the upgrade just in case.
IMO waiting to replace the computer with a win 10 model might be a better idea. You might miss some of the win 7 features that are removed from win 10.