UNSOLVED

jenko2005

updated

18 years ago

J

jenko2005

44 Posts

0

6966

September 11th, 2008 22:00

xps 720h2c keeps crashing after tunning

just upgraded from vista 32bit to vista 64bit done a clean install, installed vista with only 2gig of cosair dominator pc8500 ram update windows and installed all drivers however when i was running on the 32bit o/s my factory overclocked was running at 3.47ghz now it keeps crashing and resetting to 2.66ghz any idea ive been running ntune and changing the settings in the bios but to no avail
  • ai5u

    272 Posts

    280

    0

    Posted September 12th, 2008 01:00

    What BIOS version are you running?
  • jenko2005

    44 Posts

    280

    0

    Posted September 12th, 2008 08:00

    the latest A06

  • vvspy

    133 Posts

    280

    0

    Posted September 12th, 2008 12:00

    did u install the latest nvidia forceware driver? it looks nvidia sata would cause crashing after OC.

  • jenko2005

    44 Posts

    280

    0

    Posted September 12th, 2008 16:00

    when using ntune to do a quick 20 minutes tune when it adjusts the agp/pci-e bus the current setting  is 2500mhz after a  20 minute tweak it keeps going over 3850mhz then when ntune finishes i can move mouse once then pc just hangs

  • Davet50

    6 Operator

    •

    14442 Posts

    280

    0

    Posted September 14th, 2008 19:00

    How are you trying to OC? With the "X" version you do this in the bios with no ntune. And if you are using a version of ntune that still lets you do a course tune your version is way way out of date. The newer versions are now called ESA and there is no longer an option to run a course or fine tune.

     

    Also check in the bios the EPP/SLI setting for the ram. It more than likely needs to be in the off condition.