UNSOLVED

QuadSquad

updated

19 years ago

Q

QuadSquad

16 Posts

0

72879

February 7th, 2008 15:00

XPS 420 - Media Card Reader Vanished - Not shown in my Computer - Help!

Hi there people - first post for me.  Been slewing around this forum for past 2 weeks as I've had my 420 for 3 weeks now and pretty happy with it.

Yesterday i was happily using the SD card slot of the memory card reader and it was working perfect.

However i switch the PC on this morning to find that when i insert a SD card into the slot nothing shows up, neither is there anything in 'my computer'.

So far i've researched these forums and used my search buddy google and have found a number of people are having the same issues.

First thing i did was check 'Device Manager' - There are no yellow question marks anywhere there so all seems well.

Then i open the case and jus unplug the cable that attaches the reader to the motherboard.  Switched back on and it successfully found the card reader, however when i put the SD card in, it vanished again in my computer - Strange or what!

Next up installed the latest 'intel' driver' from dells website to see if this fixed the problem - and am back to square one - without a working media card reader.

The only messege i did get was a balloon pop up from vista saying "unknown device installed successfully" - I'm pretty certain this is the card reader however the computer/device manager is not recognising the card reader.  I have tried uninstalling the driver, disabling it and even updating it but to no avail :(

Does anybody have any more suggestions as to what i can try as its really bugging me!  Sorry for the essay. 
Thanks for reading, QuadSquad.
  • Wistril

    38 Posts

    918

    0

    Posted February 7th, 2008 15:00

    I think your card reader has been talking to my CD-ROM drive.

     

    Does it do this will all SD cards, or just that one?  If you put the card back in the camera, can the camera read the images?

     

    Not sure if installing a bad SD card would hose the reader, but it's all I can think of, other than a bad reader.

     

    Luckily, there are people much more techincally savvy than I on this forum, I'm sure one of them can help.

     

     

  • QuadSquad

    16 Posts

    918

    0

    Posted February 7th, 2008 15:00

    Wistril:
    Images on my sd card read no problem in my camera , its just the media card reader on the dell machine.
    I've tried a few of my sd cards but nothing from the dell. Thanks for your reply.

    Chris M
    Thanks for your reply - No, windows update didn't load anything upon start up.

    :(
    Message Edited by QuadSquad on 02-07-2008 05:27 PM
  • dschieses

    89 Posts

    918

    0

    Posted February 7th, 2008 15:00

    Hey,

     

    maybe the reinstall of the cardreader software will help.

    I think its the TEAC device driver.....

    Is bluetooth integrated?

    if yes there is a additional driver software with firmware update aviable.

     

    maybe this help...

    cu

    dschieses

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    918

    0

    Posted February 7th, 2008 15:00

    QuadSquad,

    Did Windows Update load anything when you turned it on that morning?


    DELL-Chris M (old account)

    #IWork4Dell

  • dschieses

    89 Posts

    921

    0

    Posted February 7th, 2008 16:00

    Hey,

     

    check the cable inside the pc and restart.

    but be sure that there are no cards insert during restart the pc.

    Does other USB devices working fine?

    Like external HDD or USB sticks..

     

    cu

    dschieses

    Message Edited by dschieses on 02-07-2008 12:54 PM
  • rose_h

    1 Rookie

    •

    102 Posts

    918

    0

    Posted February 7th, 2008 16:00

    did you check inside the computer to see if the  cable came undone from the card reader?
  • QuadSquad

    16 Posts

    918

    0

    Posted February 7th, 2008 16:00

    hi dschieses

    I've tried reinstalling the driver for the TEAC c200 but it says "device not found" :S

    its the standard reader not the bluetooth one.



  • C3PO5

    2 Intern

    •

    2693 Posts

    921

    0

    Posted February 7th, 2008 17:00

    Hi QuadSquad

    I don't know if this will help but worth a shot !

    http://teknobabble.wordpress.com/2007/08/18/vista-driver-problems-installing-a-usb-media-reader-a-solution/

    Good Luck

  • 921

    0

    Posted February 7th, 2008 17:00

    I'm glad I'm not the only one with this issue. I think I have the same issue like you. The reader can work for a while and then all of a sudden disappears upon inserting an SD card or a MemoryStick. I get a balloon saying that a USB device has been malfunctioning and after that it shows up us Unknown device in the Device Manager. I have to power down the computer before the reader is visible again, but it eventually disappears just the same way.

     

    Dell Support has been giving me the run around, trying different things and they even sent me out a replacement reader, but the behavior is the same. They just emailed me a link to the latest drivers. I need to check tonight, but I'm pretty sure the once I had were the latest. I actually uninstalled the TEAC drivers last night and let Vista use it's own USB Mass Storage drivers, but that didn't fix it, either. There seems to be something fundamentally wrong with the reader, the motherboard or potentially the power supplied to the reader or a bug in the latest firmware. The latter seems to be the most likely issue as so far I haven't noticed any other USB issues. My keyboard works fine, the Bluetooth module in the reader works fine, my tuners appear to work fine. Right now Dell Support is trying to blame it on the drivers installed.

  • 435

    0

    Posted February 7th, 2008 18:00

    I've already tried that. That was the first suggestion Dell Support made, but it didn't repair my issue. The reader did work for quite a while after that, but next morning it started to flake out again. I can get it to flake by inserting an SD card, eject, remove the card, insert a MemoryStick, eject, remove, MemoryStick. Sometimes it flakes as soon as I insert the memory stick, other times I repeat the above a few times and then it flakes, other times I just wait a little like letting the computer run over night and then repeat the above in the morning.