
UNSOLVED
WinXP wanting to change to 98se
I have a winxp dell 8200, it came with winxp installed.
I am having various difficulities with it, tech support cannot help, they don't know what is wrong.
Well, I wanted to know if it possible and easy to simply install win 98se on the machine.
If I can, how do I go about doing it?
I am having various difficulities with it, tech support cannot help, they don't know what is wrong.
Well, I wanted to know if it possible and easy to simply install win 98se on the machine.
If I can, how do I go about doing it?
Responses (3)
Solutions (0)
- If you are willing to go back to 98 then you should be willing to do a clean install of XP, which should solve your problems.
http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp
(Home built)
Pentium 4 1.9 Gig / 478 pin 400Mhz FSB
Shuttle Motherboard
Via chipset P4x266 VT8233 DDRam Support
Windows XP (home edition - Clean Install!)
DDRam 768 Meg - WD 80 gig HD ATA 100
Gainward GF3 Powerpack Golden Sample/64 meg
LiteOn 24x10x40 CD-RW - Pioneer DVD 500m
Pinacle Firewire Card - Linksys Lan 10/100
Santa Cruz Sound Card (4127 beta drivers)
Dell 991 Monitor - Altec Lansing 885 Thx Speakers
Microtek 3700 Scanner - HP 1100 Printer
Altec Lansing 885 Thx Speakers
Other: (Dell built)
XPSB1000r ,XP home, Gforce 2 pro 64meg
384 megs PC700 Rdram - 60 gig maxtor HD
DVD-Rom - Sony CD-RW - dre53:
Just curious about your reply.....
Since Dell installed XP on this system, would a clean install/re-install of XP make that big a difference in resolving the problems? Doesn't sound like this was an "upgrade" from the original post.
Of course, this may be a tough question to ask since, unfortunately, since we don't know what exactly are the problems this person is having with XP.
Thanks for the enlightenment.
RikkiM
Message Edited on 01/24/02 10:25AM by RikkiM

Denny Denham
2 Intern
•
18798 Posts
72
0
Posted January 23rd, 2002 15:00
It is probably possible and it is relatively easy assuming that you haven't added too much to your system since you received it. You will have to format your hard disk (FDISK and debug may also be required since your hard disk will be using the NTFS file format). All perishable data on the hard disk will have to be backed up.
After you do that, however, you will have to ensure that Windows 98 drivers are available for all of your peripherals and your chip set (your chip set drivers were a part of Windows XP when it was installed).
Before you take such a dramatic step, I'd advise you to post your specific problems here or (better) in the Software - Windows XP conference. It's possible that someone here will have an insight that the tech support personnel you spoke with did not have.