UNSOLVED

Thermal

updated

18 years ago

T

Thermal

3 Posts

0

37325

May 27th, 2008 22:00

Will non-ecc SDRAM work in a Precision T7400?

I'm planning on buying a T7400 with Two Quad Core Xeons (3.0GHz, 1600).  I need at least 8Gb of RAM but that option is not available when I try to "Customize it".  Can I just buy 8Gb of non-ecc ram and instal it?  Or will it only run with ecc SDRAM?

 

Thanks!

  • Vyprman

    79 Posts

    658

    0

    Posted May 28th, 2008 09:00

    Dell Precision Workstation T7400 supports only fully buffered DDR2 DIMMs, referred to as FBDs or FBD. Fully buffered DDR2 DIMMs consist of a set of normal DDR2 memory devices plus what is known as an Advanced Memory Buffer (AMB). This AMB communicates via a narrow high speed frame-oriented interface (similar to PCI-E) to the MCH and other DIMMs in its particular channel. The AMB also translates the serial memory accesses into DDR2 signals for communication with the DRAM devices.
  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    658

    0

    Posted May 28th, 2008 12:00

    As a summary; this system only accepts FBD dimms, which all have ECC, so you cannot use non-ECC memory.

    FBD memory is more expensive, but when buying a T7400, the cost of 8GB isn't a major problem.

    To select 8GB or more, from the dell.com page, select desktops for "Large Business". From there select the Workstations and select them with a 64 bit OS (any 32-bit version of a desktop OS can't use more than about 3.25GB of memory).