
UNSOLVED
Transfer to new hard drive
Hi All I need to replace current hard drive (running out of room) with new larger drive. I read about "mirroring"data from old drive to new one, can someone tell me how to do this? I am comfortable working on my computers. It is a Dimension 8300. Thanks.
Responses (5)
Solutions (0)
shesagordie
12 Elder
•
46017 Posts
451
0
Posted April 3rd, 2009 21:00
JohnDavey
You should be able to use 'Cable Select', without a problem.
Bev.
shesagordie
12 Elder
•
46017 Posts
451
0
Posted April 4th, 2009 13:00
JohnDavey
You are welcome.
A hint: If you use Acronis, download the user's manual and give it a read. :emotion-5:
Bev.

shesagordie
12 Elder
•
46017 Posts
451
0
Posted April 3rd, 2009 19:00
JohnDavey
You need a imaging utility, similar to either Acronis True Image Home 2009 or Acronis Migrate Easy 7.0
If you buy the retail boxed version of the Seagate/Maxtor hard drive, a copy of Acronis should be included, this can be used only with their drives, or you can download it from Seagate/Maxtor website, you will also find that other hard drive manufacturers have their own free cloning software available.
First, install the new drive as the secondary, image the exsisting C:/ to it. Immediately shut the system down, switch the data cable to the new drive, making the new hard drive the master and see if the system boots correctly.
Boot the system with only the new hard drive connected.
Remember to leave the original drive disconnected, until the new hard drive is working to your satisfaction.
Before cloning a hard drive, be certain that existing drive has no corruption or virus on it, as these will be transfered to the new hard drive.
Bev.