UNSOLVED

jap15

updated

26 years ago

J

jap15

14 Posts

0

1812

January 19th, 2001 18:00

startup extemely slow!!

it's making me mad!!

it takes 3 1/2 minutes from the time you see "dell" to the time my network login appears. MY 486 RUNNING WIN98 RUNS FASTER THAN THAT!!!

what i have is an dimension 8100, 128 mb ram, 80gb hdd, 1.5 ghz p4, me, etc...

what is does it that it goes through the dell bootup thing and at the picture of ME, it sits there for like 2 or 3 minutes. nothing is happening as far as i can tell, the hdd light ain't blinkin', the drive's aren't being recognized or whatever. it used to load up like nothing to it but now...it's RIDICULOUS!

please help if you can

thanx,

jeremy pierce
  • dlongley

    23 Posts

    749

    0

    Posted January 19th, 2001 18:00

    Do you have a network adapter? Its possible that its searching for a DNS server that doesn't exist. What other suspicious hardware do you have?
  • dlongley

    23 Posts

    749

    0

    Posted January 19th, 2001 18:00

    Go to your network settings and try a fake IP address. Make sure DNS is off and reboot.
  • jap15

    14 Posts

    749

    0

    Posted January 19th, 2001 18:00

    yes i do have a network card and it came with the system. it's a 3com 10/100 lan card i think. i also have a home network but this problem has been going on before my network was even setup. the problem actually started about 4 startups after i set the computer up
  • dlongley

    23 Posts

    749

    0

    Posted January 19th, 2001 19:00

    Don't worry, no problem. Go to your control panel. Select networking. Choose your TCP/IP protocol and then choose properties. Go to DNS Configuration and select disable DNS. Then go to IP Address and choose your own IP address. Use a fake one such as: 128.0.0.1. You dont need a subnet mask. Then select ok and reboot when it requests that you do. If it doesn't request to reboot, then close the control panel and restart your computer. Post back to let me know if this speeds up your startup.
  • jap15

    14 Posts

    749

    0

    Posted January 19th, 2001 19:00

    excuse me for being a little illiterate to what you just said :)

    how do you do this?

    sorry :)
  • jap15

    14 Posts

    749

    0

    Posted January 19th, 2001 19:00

    no, startup wasn't faster...

    i don't know what the problem is...
  • jap15

    14 Posts

    526

    0

    Posted January 19th, 2001 20:00

    how bout if i just delete the ps2 mouse from the system?
  • G Lang

    2 Intern

    •

    219 Posts

    526

    0

    Posted January 19th, 2001 20:00

    No, can't do that because Windows will then search for it and reinstall. Need to disable it.

    Glen
    4100 933Mhz
    19VH001
    FFD4001
    Win98SE
  • dlongley

    23 Posts

    526

    0

    Posted January 19th, 2001 20:00

    This sounds like the way to go, I'm not sure if just disabling it in windows will work, but if you shut off the port entirely (through the BIOS like you suggested) then windows won't know to look there.
  • dlongley

    23 Posts

    749

    0

    Posted January 19th, 2001 20:00

    Someone with an 8100 said they disabled a ps/2 mouse setting somewhere (i dont know where and i dont have an 8100...) that sped up boot time. You'll have to look around to see if you can figure that out. Just another suggestion.