UNSOLVED

ifarns

updated

21 years ago

I

ifarns

20 Posts

0

6146

December 28th, 2005 23:00

Re: Monitor Out of Sync Range

Can anyone tell me why my Flat Panel 1503 monitor is out of sync and what can I do to correct it?
 
Someone told me my video card was bad and I changed it, but now it works the same way.  Monitor blank, no image on screen, but with the video cable unplug, the self-test Feature check appears on the screen.
  • Jbirk

    339 Posts

    262

    0

    Posted December 29th, 2005 02:00

    HI, do the following:


    Reset hte Monitor to factory settings and reset the computer.

    If it still doesn't work, press F8 durring boot and start in VGA Mode.

    Make any needed video changes that are compatible with your monitor i.e. frequency refresh. If it fails, you can try a different monitor that is the same type or different if you don't have the same one.

    You can also try to update drivers or a different video card.

    Cheers, Mate!

    -Justin
  • Pedster

    61 Posts

    262

    0

    Posted December 29th, 2005 13:00

    I had this problem recently with my 8100, it turned out to be my ATI GFX Card.....
  • Jbirk

    339 Posts

    262

    0

    Posted December 30th, 2005 23:00

    Typically, you cannot set an out of Sync rate unless you really really try. Even then you have to click yes to keep it :)

    Your best bet is to reset the CMOS and reseat the card.

    Then try Last Known Good or VGA mode and verify your settings.


    If you do not succeed, try a different monitor to determine if the problem is the card or monitor.

    My guess is a bad video card.