
UNSOLVED
Optiplex 755 - not enough horsepower for USB scanning?
I don't know exactly what the power supply wattage is in the Optiplex 755s, but I do have a theory.
I have a client with a Xerox document scanner they just purchased. All USB ports on the 755 are full with the exception of one, for the scanner. When plugged into the back of the tower, during the scanning process, the driver and scanning program lock up, and after a while we get a "communication error" with the scanner. When plugged in the front ports, the scanner may work for a bit, but eventually, we will get the same glitch.
The scanner works fine on other computers in the office. The others are not Optiplex 755s.
Curious as to thoughts. I am thinking that the power is being drawn away from the USB by the scanner.
Responses (2)
Solutions (0)
The USB ports do have a limitation on power, and depending on what else is plugged in, this could cause the problem.
A very easy solution is to purchase an inexpensive USB hub that has it's own power supply. This way you're taking the load off of the PC's USB ports.As general practice, the only USB devices I have plugged directly in are my camera, keyboard/mouse, and USB thumb drives. All other peripherals attach via a self-powered USB hub. The difference is noticeable.

Hydralisk00222
2 Intern
•
2440 Posts
264
0
Posted August 22nd, 2008 20:00
USB ports are full? As in they are all being occupied?
That would be a problem... USB ports have a power limit so they don't overload.