
UNSOLVED
New Optiplex 780 won't boot to DVD
I have a new Optiplex 780 won't boot to the optical drive. It came with the XP Pro downgrade, a single 320 GB SATA HD and 3 GB RAM. I got it configured to suit me and created a set of restore disks for it using Macruim reflect. I created a Macrium restore disk, which is a linux boot disk, and tried it. It comes up in a continuous loop after the Intel Storage Matrix reference on the screen during POST. I created a BartsPE boot disk,and it bluescreens with a stop 0x00000008 error. Same effect with an Ultimate Boot Disk 4 Windows (which is based on Bart's PE as well).
Boots and runs flawlessly from the hard drive, so I guess my questions are three fold. Is this an issue of needing a 3rd party driver for the Intel storage matrix? Is this driver accessible on the hard drive, or would I need to provide it from an external source, like a USB stick, and if so, How do I know which one to get from the Intel website? And finally, since this machine is not using RAID drives, why do I even need it, and can I just eliminate it?
Thanks, CJon
Responses (7)
Solutions (0)
Update: System bios shows this machine as "Raid On", even though there is no second hard drive, it is not RAIDed, and was ordered as "No Raid". Switching to "Legacy" to eliminate the RAID configuration results in the same 7B stop error that I get when I try to boot from a BartsPE CD.
I called tech suppport, and after 3 transfers, ended up in New Dellistan where "Mark" told me that he was only trained to do hard ware diagnostics. We ran the onboard diagnostics and, guess what, the hardware is fine. He told me that all Optiplex 980's (mine is a 780) were configured as Raid ON and the operating system "took care of that". When I said XP or Windows 7, he said XP, but Windows 7 would, too. When I asked him why Windows backup wouldn't write to my DVD burner, he said it was a software problem, and he could switch me to someone who could help me with it, but that was a fee-based service.
Makes me wonder how HP's service is these days.
Jeff Hoffman
2 Intern
•
881 Posts
2032
0
Posted August 17th, 2010 18:00
I can't speak to most of your questions. (just what you wanted to hear right?) BUT my system also has RAID enabled which I wondered about since I too have only one HDD. My other choice is ATA in the BIOS. After considerable searching I found that: The RAID is turned on to enable advanced features in the onboard controller. While it will work in ATA mode it is painfully slow.
So I just leave it set that way. I don't think that is the cause of your other problems.
Wish I could help more.
Jeff :emotion-22:
Jeff Hoffman
2 Intern
•
881 Posts
2032
0
Posted August 17th, 2010 20:00
Yeah I didn't think I would exactly make your day. The only other thing I know to try would be to post the question in the Disk Forum. If nothing else you might get some fresh eyes on the problem.
Sorry.
Jeff
Well thanks for that.
My main problem is that the system won't read the DVD writer when I boot to a recovery disk and won't write to it with Windows Backup. I think this a function of a misconfigured Intel Matrix Storage system, and the nice folks at New Dellistan don't seem able to be able (or willing) to help me.
Drew.Hunter
2 Posts
2032
0
Posted February 13th, 2011 14:00
Update: System bios shows this machine as "Raid On", even though there is no second hard drive, it is not RAIDed, and was ordered as "No Raid". Switching to "Legacy" to eliminate the RAID configuration results in the same 7B stop error that I get when I try to boot from a BartsPE CD.
I called tech suppport, and after 3 transfers, ended up in New Dellistan where "Mark" told me that he was only trained to do hard ware diagnostics. We ran the onboard diagnostics and, guess what, the hardware is fine. He told me that all Optiplex 980's (mine is a 780) were configured as Raid ON and the operating system "took care of that". When I said XP or Windows 7, he said XP, but Windows 7 would, too. When I asked him why Windows backup wouldn't write to my DVD burner, he said it was a software problem, and he could switch me to someone who could help me with it, but that was a fee-based service.
Makes me wonder how HP's service is these days.
I understand this part, Thanks for your sharing! It's comprehensive.

cjon
25 Posts
2032
0
Posted August 15th, 2010 14:00
Sorry, a memory fault on my part. The Stop code is 0x0000007B (0xf78D6528, 0xc0000034, 0x00000000, 0x00000000) not 0x0000008 as listed above.
Also, I created a Dell Backup System disk, and it will boot from that.
CJon