UNSOLVED

sollman

updated

19 years ago

S

sollman

27 Posts

0

15669

May 1st, 2008 20:00

new bios for 720

Any idea what the new 06 bois fixes?
  • MoneyGuyBK

    2 Intern

    •

    2294 Posts

    527

    0

    Posted May 1st, 2008 20:00

    Read this thread

    * Fixes and Enhancements support new intel cpus

    And from ChrisM in that same thread (Page 3):

    * Bios A06 added support for the Quad Core Yorkfield 9300/9450 but not the 9550.

     

     

    Peace

     

     

  • n0vatec

    16 Posts

    527

    0

    Posted May 1st, 2008 20:00

    Personally the new BIOS is a suprise. I purchased a Q6600 as it seemed anything new quad wise would not work. Several comments from Dell reps!!!!!!!!!!!!!!!!!!!!!!!! who don't reply to messages that they don't like!

     

    Dell to be honest forget any decent gaming rigs, stick to the usual output you do pretty well.

     

    I've replied to a Mod on here asking for input to be totally ignored, not on really.

     

    n0v

  • 527

    0

    Posted May 2nd, 2008 13:00


    @MoneyGuyBK wrote:

    Read this thread

    * Fixes and Enhancements support new intel cpus

     

    And from ChrisM in that same thread (Page 3):

    * Bios A06 added support for the Quad Core Yorkfield 9300/9450 but not the 9550.

     

     

    Peace

     

     


     

    Thanks for the information. I'm not good when it comes to processors and what is better/worse etc, but I'm correct in assuming the QX6850 is still the best processor the 720 can take? The Quad Core 9300 and 9450 are not as performing, are they?
  • gdwrnch3

    2 Intern

    •

    3278 Posts

    527

    0

    Posted May 2nd, 2008 14:00

      John,

    @The QX6850 would be processor to have if you wanted to overclock your machine. I have one, and it will run @ 3.7Ghz effortlessly, is it worth the extra bucks, I'm not sure. I got mine in and running at 3.7, benchmarked it, fooled with it for awhile, and turned it back to 3GHz, and it's spent most of it's time there.  

        I also have one running a Q9450, and it performs very well. It does everything I do almost as good as the QX6850 at stock settings.

     


    @John XPS 700 wrote:
    Thanks for the information. I'm not good when it comes to processors and what is better/worse etc, but I'm correct in assuming the QX6850 is still the best processor the 720 can take? The Quad Core 9300 and 9450 are not as performing, are they?

     

  • Davet50

    6 Operator

    •

    14442 Posts

    527

    0

    Posted May 2nd, 2008 16:00

    only doing it will tell. Every chip/system combo will be different..give it a shot and see..in theory it more than likely should...
  • vvspy

    133 Posts

    527

    0

    Posted May 2nd, 2008 16:00

    i guess i should OC my QX6800 a little bit. Can it run steadily on 3.46GHz???
  • MoneyGuyBK

    2 Intern

    •

    2294 Posts

    527

    0

    Posted May 2nd, 2008 19:00

    My QX6800 in my 720H2C runs perfect at 3.73 and 3.83..... 24/7 at 100% with Folding@Home project.

     

    I can even get it to post and work at 4.0 ;) however, for the sake of too much overheating I don't.... Mr. GoodWrench could not believe me on the 4.0 until I sent him some snips :) So I am certain he will vouch for me on this if you guys can't believe me!!!

     

     

     

    Peace

     

     

  • gdwrnch3

    2 Intern

    •

    3278 Posts

    527

    0

    Posted May 2nd, 2008 20:00

      Mine ran @ 4GHz on air, before I flashed my memory with the lower voltage spd. Now it won't. And it ran OCCT stabily. Don't really care anyway as my QX6850 spends almost all of it's time @ 3GHz now anyway. I've learned what I wanted to learn about the 720 board, and I'd like to preserve my processor for as long as I can..  :-)
    Message Edited by gdwrnch3 on 05-02-2008 05:09 PM
  • 87

    0

    Posted May 3rd, 2008 12:00


    @gdwrnch3 wrote:
      No, you don't have to set it back to stock. I just do as I don't need the extra, and I just want to preserve the life of my cpu/motherboard as long as I can, or until I want a new machine. Increasing voltage causes premature wear, how much?, I don't know, I haven't ruined one yet....   :smileywink:

     

    Well in the H2C the voltage is 1.57v when its at 3.66GHz. Thats above the Intel recommendations but I guess its okay with the liquid cooling?

     

    Also mate if you don't mind me asking, what sort of 3Dmark does your system clock up? Also how come you have three XPS 720's? lol. I've got a 700 and a 720 H2C, but your systems are just insane.

  • 527

    0

    Posted May 3rd, 2008 12:00

    Even in the XPS 720 H2C...is it best to turn of the overclock when your not gaming/benchmarking rather than let it run at 3.66GHz all the time?

     

    Anyways, regarding this convo...I booted at 4.66GHz but it almost blew my XPS up. :(