UNSOLVED

jknowlen2009

updated

13 years ago

J

jknowlen2009

1 Message

0

27467

August 20th, 2007 21:00

need help choosing video card for dell dimension 3000

hello everyone,
i have a dell dimension 3000 and i recently bought age of empires 3. age 3 doesnt run very well on my pc and im looking to upgrade my video card. i dont really care if the graphics are amazing i just want age 3 to run well and to not lag as much as it does. and i also want the card to be affordable. i am not experienced with computers and any suggestions are greatly appreciated!
 
thank you!
  • Lord_Maxthor

    2 Intern

    •

    177 Posts

    877

    0

    Posted August 21st, 2007 01:00

    You have to install a PCI based graphic cards. Or much better save your money and buy a new PC with PCI-E 16x for good gaming experience.....
  • SR45

    2 Intern

    •

    12138 Posts

    877

    0

    Posted August 21st, 2007 09:00

    Some PCI slot cards to consider. None of which are great cards, but slightly better than the integrated video chip installed now.....

    <ADMIN NOTE: Broken link has been removed from this post by Dell>

     X1550 PCI slot card

    http://www.bestbuy.com/site/olspage.jsp?id=1130987962366&type=product  6200 pci slot card ( Not for the E310/3100 system )

    http://www.compusa.com/products/product_info.asp?ref=cj,cj&product_code=51446597&Pn=GeForce_FX_5500_Video_Card  FX 5500 PCI slot card

    How to disable your integrated video chip as posted by the Moderator

    2200, 2300, 2350, 2400, 3000, 3100, E310, B110/1100

    * Right click the My Computer icon
    * Click Properties
    * Click the Hardware tab and/or the Device Manager button
    * Open the Display Adaptors. You should see the Intel video card
    * Double click the listing for Intel whatever
    * At the bottom under "Device Usage", click the down arrow and change this to "Do not use this device, disable"
    * Click OK- Apply- OK
    * Close all boxes when done
    * Click Start- Turn Off Computer- Restart
    * Press F2 at the blue Dell logo screen
    * Down arrow to either:
    Onboard Devices- Primary Video
    Primary Video
    Integrated Devices- Primary Video Controller
    * Change yours to AUTO or PCI (whatever is listed)
    * Press ESC several times to Exit and Save your changes
    * As the system starts to restart, power the system off
    * Open the case cover and add the PCI video card
    * Connect the monitor to the added PCI video card
    * Power on your computer
    * Let the computer boot up and load the drivers off of the CD provided with the card
  • 876

    0

    Posted August 21st, 2007 21:00

    SR45

    :D

    http://support.microsoft.com/?pr=gms

    Support for the game.

    Does the game play okay. Just set the options to low.

    Message Edited by electromagnetic on 08-21-2007 11:57 PM
  • SR45

    2 Intern

    •

    12138 Posts

    876

    0

    Posted August 22nd, 2007 10:00

    Nice find electromaginetic.  Will keep as a favorite.   :smileywink:
  • afmcorp

    8 Posts

    876

    0

    Posted August 27th, 2007 17:00

    pls note i do not have any need to play games.  all my computers are for business.  my video was dragging so i wanted more memory that wasn't shared so i went for this new card.  i run cad and website tools etc.
     
    i have installed the nVIDIA pci 256meg ddr FX5500 card.  my computer is the 3000.  i know how to upgrade the card but 2 things keep me from getting it complete.
     
    in the bios u have either Auto or ON Board as a choice.  auto should be the choice but the screen remains black.  in order to get a screen u must run it with On Board.  no problem
    insert the card let it boot disable the intel card shut down change cable reboot but......the screen remains black and the monitor is in a stand by or off condition.  finally i get an error message that says " can not display this video mode.  optimum resolution 1280 x 1024.  this is on a black screen.
     
    ok change to 1280 x 1024 well same error message is given.
     
    ok the cd's i got do not have an xp driver  they supply everything from 95 to vista with no xp [stupid huh?] 
     
    i assume that i probably have a driver error can someone confirm this to me it's the only thing i can think of.
     
    tks much
    craig
     
  • afmcorp

    8 Posts

    876

    0

    Posted September 5th, 2007 13:00

    guys i got to re-visit this issue.  to me it appears that the bios is not supporting additional cards.  the only choices are that message. [see above post]  the problem as i see it is that changing drivers in windows is fine for windows but how on earth is this going to accomplish anything on the boot up.  the blank screen and the yellow lite on the on button tells me that the video is asleep waitin for something to tickle it.
     
    here is my numbers
    dell 3000
    2.4 ghz celeron
    XPhome svcpk 2
    3 hard drives none of which is dell's seagare
    no cards added as yet only the video card when in
    standard PCI slot
    service tag cbtcj71
     
    how can i tell is my board will accept this vid card?
    and if it does accept it what could i possibly be doing wrong.
  • 876

    0

    Posted September 15th, 2007 23:00

    You got to disable the intel onboard graphics first

    Then restart the PC to get VGA mode

    Then install the nvidia graphics card fx5500

    load drivers off card so that might be the problem you have windows XP sp2 right ?

    :|

    What drivers for the card have got, post the version here ok. :)

    What is the card maker ??

    Message Edited by electromagnetic on 09-16-2007 01:34 AM
  • lambdapro

    381 Posts

    876

    0

    Posted February 19th, 2010 18:00

    Onboard means the integrated Intel graphics chip that is built into the motherboard.

    David

  • 876

    0

    Posted February 19th, 2010 18:00

    Thank you, SR45, for the instructions on how to change the video bios. 

    I just bought a PNY FX5200 but PNY's instructions do not include this necessary step.  Yours worked perfectly!  And my 5 1/2 year old Dell Dimension 3000 is singing along in this age of video everything on websites everywhere. 

    One slight difference on the instructions, my "Integrated Devices - Primary Video Controller" options were: AUTO or ONBOARD.  I guessed AUTO would be better than Onboard, so left it at the setting already selected.  (Not really sure what Onboard meant, exactly.)

    Many blessings to you!

     

    How to disable your integrated video chip as posted by the Moderator
    * Right click the My Computer icon
    * Click Properties
    * Click the Hardware tab and/or the Device Manager button
    * Open the Display Adaptors. You should see the Intel video card
    * Double click the listing for Intel whatever
    * At the bottom under "Device Usage", click the down arrow and change this to "Do not use this device, disable"
    * Click OK- Apply- OK
    * Close all boxes when done
    * Click Start- Turn Off Computer- Restart
    * Press F2 at the blue Dell logo screen
    * Down arrow to either:
    Onboard Devices- Primary Video
    Primary Video
    Integrated Devices- Primary Video Controller
    * Change yours to AUTO or PCI (whatever is listed)
    * Press ESC several times to Exit and Save your changes
    * As the system starts to restart, power the system off
    * Open the case cover and add the PCI video card
    * Connect the monitor to the added PCI video card
    * Power on your computer
    * Let the computer boot up and load the drivers off of the CD provided with the card

  • 256

    0

    Posted February 19th, 2010 21:00

    I had a feeling it was the same as integrated graphics.  Thank you for the clarification. 

    I hope this archive will be of help to someone else who needs an upgrade.  It gave me the reassurance needed to install this old card on an old machine and know they would work together; and not kill off this old comp I am trying to save.  Can't afford to buy a new one.

    Blessings for you, David.