UNSOLVED

Feorod

updated

22 years ago

F

Feorod

10 Posts

0

10708

September 14th, 2004 01:00

Motherboard upgrade: PW410 to PW330... Possible ?

Hi all,

I want to upgrade my good old Precision 410 and I could have a deal on a Precision 330 P4 M/B.

Is it possible to fit this M.B in the 410 MiniTour chassis ???

Is it possible to plug all devices without making XP freak out ??

In short, what are the pros and cons of such a move...

Oh, and all I've done on this baby is add a 2nd IDE HDD...

Newbie forever,

Eric, Quebec CAN

PS: I know I'd have to buy new RDRAM... :((
  • speedstep

    11 Legend

    •

    46969 Posts

    365

    0

    Posted September 14th, 2004 02:00

    Its not Possible.

    You can buy a Powerleap 1.4ghz tulatin with a slotket and get darn near 1.4Ghz pentium4 speed via the powerleap processor upgrade. Or for a zillion dollars you can get the Server version and add 2 Tulatins in SMP mode.


    The 1.4Ghz is about $120 and the Dual Pentium3 Tulatin Kits are about $600.

    IMHO the Powerleap is the best bang for the buck.
  • Feorod

    10 Posts

    365

    0

    Posted September 14th, 2004 12:00

    Hi again,

    Thanx a million for the answer. I didn't know this thing existed. It says the Powerleap can bring the speed close to 1.4GH depending on the front bus capacity. Since the PW410 is at 933MH, do you think the Powerleap will boost it significantly considering the $ invested ??? In extenso, is the front bus of the PW410 big enough to reach the 1.4GH ???

    I won't go thru all this trouble for a 10% speed increase... see what I mean...??

    Thanx again for the expertise ..!

    Eric, Qc CAN
  • How2do

    75 Posts

    365

    0

    Posted September 14th, 2004 18:00

  • speedstep

    11 Legend

    •

    46969 Posts

    365

    0

    Posted September 14th, 2004 20:00



    @Feorod wrote:
    Hi again,

    Thanx a million for the answer. I didn't know this thing existed. It says the Powerleap can bring the speed close to 1.4GH depending on the front bus capacity. Since the PW410 is at 933MH, do you think the Powerleap will boost it significantly considering the $ invested ??? In extenso, is the front bus of the PW410 big enough to reach the 1.4GH ???

    I won't go thru all this trouble for a 10% speed increase... see what I mean...??

    Thanx again for the expertise ..!

    Eric, Qc CAN

    933Mhz is not a possible speed for the Precision 410.

    The 410 uses the 440bx chipset 100Mhz Fsb and I believe the bios limits the cpu to 800Mhz for coppermine Pentium3's

    The Tualatin is sometimes faster than the Pentium4.

    http://www.roberthancock.com/dell/plip3t/powerleap-v2.htm

     

  • Kabanos

    16 Posts

    365

    0

    Posted September 17th, 2004 04:00



    @Feorod wrote:
    Hi again,

    Thanx a million for the answer. I didn't know this thing existed. It says the Powerleap can bring the speed close to 1.4GH depending on the front bus capacity. Since the PW410 is at 933MH, do you think the Powerleap will boost it significantly considering the $ invested ??? In extenso, is the front bus of the PW410 big enough to reach the 1.4GH ???

    I won't go thru all this trouble for a 10% speed increase... see what I mean...??

    Thanx again for the expertise ..!

    Eric, Qc CAN

    An old thread, but it may have the info you need:

    Precision 410 Upgrade:

    A single 1.4 GHz Celeron "Tualatin"

    Dual PL-iP3/T 1.1 GHz Intel P3 (or single) 

    http://forums.us.dell.com/supportforums/board/message?board.id=pw_upgrade&message.id=3272&highlight=Kabanos#M3272

    https://www.quickbase.com/db/6v74ue7a?a=q&qt=tab&dvqid=19&query={'1015'.CT.'Kabanos'}&clist=1002.1003.1008.1033.1023.1016.1012.1029.1014.1006.1015.1021&slist=1002.4&opts=sortorder-AA.groupby-VX.tmx-35

    https://www.quickbase.com/db/6v74ue7a?act=QuickSearch&srchtxt=Dell+AND+Precision+AND+410

    Message Edited by Kabanos on 09-17-2004 01:36 AM