
UNSOLVED
How do I reformat my hard drive for a dimension 8250
Well the name says it all, How do I reformat my hard drive for a dimension 8250. I have been trying for the past few hours and I just cannot seem to figure it out. I have all my files that I want backed up and such and I just want to set my computer to the way it was when I just took it out of the box. So please help me with step by step instructions.
Thank you.
Responses (3)
Solutions (0)
shesagordie
12 Elder
•
46017 Posts
189
0
Posted April 28th, 2005 23:00
Nowee.You start by partitioning and formatting the hard drive that is part of reinstalling the operating system.
First, you make the CD/ROM/DVD the first boot device. Procedures for configuring a Dimension series system to boot to the CD/DVD drive.
After this you can use the following instructions.
http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp
To find the Dell reinstall guide, that's specific to your system, go here
Prior to installing, remember to disconnect all external peripherals from the computer, except the keyboard, monitor and mouse.
While installing, delete all existing partitions (Paragraph 5) when you are prompted, then remake and format
them (Paragraphs 6 & 7), following by installing XP.
You will have to reload the drivers and applications, etc, that should be on the CDs sent with the computer, starting with the chipset driver.
After the installation, you will need to download and install the MicroSoft Critical Updates, plus any other updates you deem necessary, also remember to enable the firewall and install the AV software before going online.
.
Printing a copy of these instructions, as a reference while installing XP could also be a help.Bev.

WildOne46
195 Posts
189
0
Posted April 28th, 2005 21:00
Nowee,
See if this will help...
WildOne
Message Edited by WildOne46 on 04-28-2005 05:52 PM