UNSOLVED

os2tony

updated

20 years ago

O

os2tony

21 Posts

0

7015

August 6th, 2006 05:00

GX280 Motherboard with tray or without tray

I have a motherboard with tray for my GX280 case, but the tray does not fit or at least it does not mount. the case has the 4 bent edges for the board. The motherboard will fit by itself but the heatsink has no place to screw in the screws. Are there clips that snap in place that can be used? Or do I need the tray?
Thanks.
Tony
  • Mark1025

    2 Intern

    •

    146 Posts

    509

    0

    Posted August 6th, 2006 11:00

    form factor of case, where did you get the tray?
  • os2tony

    21 Posts

    509

    0

    Posted August 7th, 2006 01:00

    It's a SMT,I got the motherboard with tray from Ascend Tech. I'm hoping to use snap in type clips to mount the heatsink retainer to the Motherboard, since I can not use the tray which otherwise I would use the screws to mount the heatsink retainer.
    Thanks.
    Tony
  • Mark1025

    2 Intern

    •

    146 Posts

    509

    0

    Posted August 7th, 2006 16:00

    well unlike some of the other systems there is only 1 type of heatsink that uses screws for a SMTv2. cant you use some sort of nut and bolt to hold it on?
  • os2tony

    21 Posts

    509

    0

    Posted August 8th, 2006 01:00

    That kinda what I was thinking since I can't use the tray. The good thing is the motherboard came with the heatsink retrainer and clip with the screws to mount the retainer to the tray. So now I will try to get some nuts that fit or a set of screws and nuts to mount the heatsink retainerto the motherboard.
    Thanks for the suggestion.
    Tony