UNSOLVED

fnmrules

updated

20 years ago

F

fnmrules

6 Posts

0

16796

November 11th, 2006 15:00

Firewire Port on the front of XPS410 not working

For some reason the firewire port on the front of my XPS 410 does not work.  I had a recording interface plugged into it and after about a week it stopped working.  I hooked up two different external hard drives and tried three different firewire cables and the port seems to not work after a device had been plugged in for a few minutes.  I chatted with a Dell customer service rep and he told me the problem was that the port will not work if i have something plugged into the firewire port AND the firewire pci card.  I find that hard to believe.
  • 433

    0

    Posted November 11th, 2006 16:00


    @fnmrules wrote:
    I find that hard to believe.





    I don't...

    Dell in my opinion has the worst setup for ports like USB and Firewire... I had a problem on my old 8300 with the front ports not working when I had something connected to the lower set of rear ports. So it wouldn't surprise me to see that the 410 can only handle one Firewire device at a time. Probably some limit on the motherboard... I don't know, maybe I'm all wrong (which is quite possible) but I just had to throw out my experience...
  • fnmrules

    6 Posts

    433

    0

    Posted November 12th, 2006 17:00

    sorry sir but i have a firewire port on the front of my pc next too the two usb ports.
  • Karts4Kids

    99 Posts

    433

    0

    Posted November 12th, 2006 17:00

    According to your system spec you have usb2.0 ports on the front of your sytem and not firewire ports.  If you added the expansion card in the back then your system support 1394 but the front shoulnt have any firewire ports.  If you are referring to your usb ports do they all show functional within the device manager?  Touchdown Tennessee!
  • Karts4Kids

    99 Posts

    433

    0

    Posted November 12th, 2006 18:00

    Thats cool.  I was just looking at your manual and it stated that your system was configed with just usb ports in the front.  If they are on the front are they shown in the device manger?  If it is shown then have you checked for possible irq shares?  Within device manager Choose View then Choose Show Hidden Items Then Choose View - Resources by type.  Find your 1394 controller and see if it shares resources with another deivce.  If for whatever reason it does then you may just need to free up an irq.  You may also find an issue within your event viewer - System as well.  Up to date with all of your Windows stuff?
  • Davet50

    6 Operator

    •

    14442 Posts

    433

    0

    Posted November 13th, 2006 17:00

    so you ordered the optional 1394 card. .does it have front and rear connectors?
    either that have you tried to reseat the card and check all the cableing....also you could try to remove it in device manager and then  reboot to reload the drivers.....
     
    If so i think that they might be right if the controller can only handle one port at a time.......
     
    I would go with own recommendation and get a tech out to go over the system....you more than likely paid for it with your warrenty.....
  • fnmrules

    6 Posts

    433

    0

    Posted November 13th, 2006 17:00

    thanks for the tips!  i'm not sure on how to change the irq.  one thing thats funny is that everytime my recording interface quites working on the firewire hub on the front of my pc...the next day my whole pc takes a and it locks ups for about an hour or two and then finally it boots up and runs.  Then everything i have connected to the usb hubs will not work including my keyboard. i called customer service and talked to 4 different depts. (not by choice but because they would put me on hold and send me to a different dept.) and they were worthless.   do u think i should just have someone from there service dept. come down and check out my pc in person?  i've had nothing but problems ever since i got the pc and i've told everyone that i have talked to at dell that i'm not very pleased and impressed with the xps 410.  oh..and i can't return the computer for a full refund since my 21 days is up...i've only had the computer for about a month now. 
  • MzMe

    147 Posts

    433

    0

    Posted November 13th, 2006 18:00

    If you talked to them about problems within the 21 days then you might try pushing them for a return. Others have posted that they got extension to the 21 day window because they had issues. Dell's return policy indicates that you'll have to pay return shipping and perhaps a restocking fee, but I didn't have to pay either when I returned my xps 700 (I did return within 21 days). I mention that to show that Dell's policy's might be waived if you make a good case, but you might have to push for it.
  • fnmrules

    6 Posts

    433

    0

    Posted November 13th, 2006 23:00

    for some reason i get this pop up from my hardware device manager that says usb device not found or recognized.  how do i know which usb device it is considering i have 6 devices hooked up to my usb hubs?  this is something that has happened ever since i took the pc out of the box and booted it up.  i'm waiting for pc to crash again.
  • Karts4Kids

    99 Posts

    75

    0

    Posted November 13th, 2006 23:00

    Just reconnect each of the 6 one at a time until the pop up appears again.  Then you will know which device needs to have its drivers installled/updated.
  • Karts4Kids

    99 Posts

    433

    0

    Posted November 13th, 2006 23:00

    Are there listings within their for Intel USP drivers?  If there are the simplest way to find out which usb device is not recognized is to unhook a device that is currently hooked into one of your usb ports.  Refresh the device manager (close it out and reopen it) and see if the unknown usb port goes away.