
UNSOLVED
Dimension 8300 wont power on
All,
I posted this on google groups and was urged to post here as well. Here is my issue:
My Dell Dimension 8300 (no longer under warranty - should have got more than 1 year warranty :o) is about 14 months old. When I push the power button, nothing happens. Nothing means no sounds, beeps or fan movement. I have already spent countless hours on with Dell Technical Support and replaced the motherboard and power supply. I still have the same behavior. I since went back to the old parts to start diagnosing again from scratch. There is one small light lit on the motherboard so it is getting some level of power.
Could is at all be the actual on/off button on the front of the computer? Has anyone ever heard of this part needing replacement? If so, how the heck do I even remove the plastic front cover away from the metal frame to even get a look at the inside of the button?
Dell Technical support told me it was either the Motherboard, Power Supply or Processor. Could it actually be the processor? Wouldnt it at least power up or beep if the problem is the processor? Another item, none of the diagnostic lights on the back of the computer light up ever.
Please respond with any help you might be able to offer or other options I have. This is very frustrating and I am starting to think it will be less painful to buy a used 8300 on ebay for ~400 and just plug my hard drive, memory and cards into it.
Thanks in advance.....
Responses (12)
Solutions (0)
Disposition89
1 Rookie
•
65 Posts
577
0
Posted March 15th, 2005 19:00
Sounds like your processor may have died.T--Bone,
Did the problems start (and were reported to Dell) before the expiry of the warranty period? In that case, you should still be covered.
Is the power button itself lit (green or amber)?Try "advanced search" on this board, there have been several threads with similar problems.LemmiI have given up on Dell, but not on this problem...as I have a wife that needs a computer to continue working from home.
The issue did not start and was not reported before the expiy of the warrantly. There is no green or amber light lit on the actual button.
ThanksWe have had a few 8300's that have had this problem and were fixed by replacing the psu. I have read somewhere that they had a power button problem and it fixed their problem also. On my system (4600) the front panel is held closed by three small clips that have to be pulled towards the openning in case. The top one is a pain but they have put a metal band that i think you have to push and it unseats the clip.
Neil the small flea power LED is at the bottom front part of the motherboard (at least on my system) if this isnt on you are not getting anything from the psu and probably is the problem.
Here's a link to a thread that might help and it has links to older threads.
http://forums.us.dell.com/supportforums/board/message?board.id=dim_other&message.id=219360
Scott Kincanon
1 Message
578
0
Posted April 12th, 2005 06:00
I have an 8250 and have been having the same exact problem. the only way I have been able to get it to power on is by pressing the power button repeatedly, sometimes for several minutes. It's been driving me mad. I've had to use my mothers old pII gateway!
Scottrobkelly13
1 Rookie
•
17 Posts
578
0
Posted April 12th, 2005 14:00
Dell has a history of poor power supplies. But somehow the complaints about the poor PSU get removed by the moderators as soon as they are posted.
Get yourselves New PSU's
Hi, I have seen that this reply is very late but I still would like to comment. I have just received a dimension 8300 and wanted to add this computer to my network as a server. It worked great but all of a sudden the computer would not start anymore. I have check the power supply and everything is OK. The CPU cannot be the problem for it doesn't even go as far as booting up. There is a green LED on the board which is working. It seems that it is the on/off button and I took it off. I am now looking for a replacement but all numbers on the print do not give me a solid ordering number. I am looking for a:
pwb 45vex
rev A00
acp-es 94y-0
The other side has dell all over it and 0337
Can anybody tell me how I can get this part (its a print with a flat cable attached to it).
Hope to hear you soon:smileytongue:

Neil50
1 Message
577
0
Posted March 15th, 2005 19:00
You are not alone - my 8300 (approx 18mnths old) has exactly the same symptom, although I can see no live LED inside the box.
Have Dell mentioned anything about a type fault with this model? Seems a strange fault and I also am suspicious of the power on button?
Have you fixed the problem or given up?