
UNSOLVED
Dell 4300 is not powering up after trying to troubleshoot a bluescreen
My computer is left on almost always. The other day I noticed it was trying to boot itself up and was in the screen that asks to boot in safe mode, last config, etc... After trying a few different things the machine didn't ever boot all the way to Windows, so I hit the Dell website and followed the following tree
http://support.dell.com/support/topics/global.aspx/support/dsn/en/tree?c=us&cs=19&journalid=9F1228AC6C0311DAB4BE4531AD2D3D8F&l=en&s=dhs&treeid=FD0AEDC34BC62A49E030030ABD6209A0#enus
It passed the BIOS test
Was not able to boot to Safe mode
Followed the next few steps and found myself removing the case to remove hardware to see if I could get it to boot.
I thought I was pretty safe in doing this, but did realize I had gotten a lot of dust inside. I used some compressed air from a few feet away. Tried to ground myself before touching anything inside, and removed and reseated just about everything I could think of.
After closing the case, I can now not even get the machine to power up...so how did I blow the power supply doing this..assuming that is what I did? And what do I do now?
The only change in the machine is I added memory about 6 months back. Everything else is as shipped back about 4 years ago.
Thanks for any/all help.
-Matt
Responses (3)
Solutions (0)
So I have the power working now and am running chkdsk...VERY slowly (i have a feeling this could be a several hour scan). Hopefully I can get this resolved, I never truly realized how much important stuff I hadn't been backing up recently.
fingers crossed.

Bill Snyder
266 Posts
118
0
Posted December 13th, 2005 19:00
A relatively naive question: is the power cord properly reseated into the machine? This question reflects an experience which I had a few years ago.