
Solved!
Go to SolutionComputer Not Staying Off, After Power Outtage
HI,
I've got Power Settings in Windows 7 Home 64bit set to 'Stay Off' after a hard shut down or power outtage, and to Stay Off in the BIOS Power settings.
BUT, my Studio XPS 9100 still boots automatically. Is there another setting within the Power Settings or BIOS I'm missing, so that it stays off?
BIOS version is latest version.. if you call latest version 6/22/2010 A02.
Responses (2)
Solutions (0)
There is an AC power recovery section AND a Power on at specific time Section in the bios.
Run BIOS setup (press F2 before Windows starts to load) Check the following 3 settings.
1. Remote Wake Up (Disabled)
This option turns on the computer when you try to access the computer through the LAN
(Enabled by default)
2. AC Recovery
Specifies the behavior of the computer after recovering from a power loss (Off by default)
* On — The computer turns on after it recovers from a power failure
* Off — The computer remains off
* Last — The computer returns to the power state it was in before the power failure
3. Auto Power On (Disabled)
Enables you to set an alarm to turn on the computer automatically

SunScapes
18 Posts
3619
1
Posted March 11th, 2012 15:00
Disable Auto Restart on System Failure in Windows 7
Click on the Start button and then on Control Panel [or type System in the search box and choose System under the Control Panel heading in the list of results.]
Click on the System and Security link in Catagory View. Or just System in Icon Views of the Control Panel.
Double-Click on the System link and choose Advanced Sysytem Settings in the task pane list on the left.
Locate the Startup and Recovery section near the bottom of the window and click on the Settings button.
In the Startup and Recovery window, locate and uncheck the check box next to Automatically restart.
Click OK in the Startup and Recovery window.
Click OK in the System Properties window.
You can now close the System window.