UNSOLVED

mfinnan101

updated

15 years ago

M

mfinnan101

2 Intern

•

1180 Posts

0

120110

May 17th, 2008 22:00

Changing an XPS 720 to ATX

I remember reading somplace that's it's possible with quite a bit of modding to change an XPS 720 to accept an ATX motherboard. Out of interest did anyone here try it?
  • xfaega

    1 Rookie

    •

    191 Posts

    1430

    0

    Posted May 17th, 2008 23:00

    The important part the tray for the motherboard is still out of stock but you can use a ATX case if you want to cut it up.  But it is much easier to use the pre built tray.  I hope this answers your question.
  • LeahcimAz

    306 Posts

    1430

    0

    Posted May 18th, 2008 00:00

    Go to this forum Rampant Speculation Forums   Read through this forum, a guy (Pointguard1122) is converting his XPS 720 to an ATX board. He is doing a fantastic job, it will almost look factory when he is done. Check it out.

     

    Mike 

    System (1) XPS720
    Windows Vista Ultimate
    Intel® Core™2 Quad Q6600 2.40 GHz 1066 Mhz, 4Gb Crucial DDR2 PC2-6400 800MHz SLI-Ready
    Qty.(1) Seagate Barracuda 250Gb Hard Drive, Qty.(2) Seagate Barracuda 500Gb Hard Drive
    nVidia GeForce 8800 GTX 786Mb Memory, Dual Drives: 16X DVD-RW & 16X DVD-Rom
    Dell 24" Widescreen Flat Panel LCD Monitor

     

    System's (2) thru (15) Vostro 400's
    Intel® Core™2 Quad Q6600 2.40GHz 1066MHz, Windows XP Home Edition
    2GB Dell DDR2 PC-6400 800MHz, 128MB NVIDIA® GeForce® 8300GS
    250GB Serial ATA Hard Drive, Dual Drives: 16X DVD-RW Burner & 48X CD Burner/DVD
    Dell 20" Widescreen Flat Panel LCD Monitor

  • mfinnan101

    2 Intern

    •

    1180 Posts

    1430

    0

    Posted May 18th, 2008 06:00

    Thanks guys. The reason I ask was I was actually eyeing one on the Dell outlet a while back, but I've choose to put together my own home build instead.
  • gdwrnch3

    2 Intern

    •

    3278 Posts

    1430

    0

    Posted May 18th, 2008 12:00

  • mfinnan101

    2 Intern

    •

    1180 Posts

    1430

    0

    Posted May 18th, 2008 13:00

    Thanks gdwrnch, it looks like a little too much work for me though. :D
  • gdwrnch3

    2 Intern

    •

    3278 Posts

    1430

    0

    Posted May 18th, 2008 18:00

    PG,

      Like you said, it could be done in a full day(including band aids and a few choice words, lol), just the conversion that is. Not the extent of the job you are doing.

  • pointguard1122

    1891 Posts

    1430

    0

    Posted May 18th, 2008 18:00

    It really is not much work to simply do the conversion.  I am doing quite a bit of extra modding that most people would not need to do.  All you really need is a LIan Li mobo tray, a dremel, and a power cable.  I do plan to make a final summary of the project that only includes the steps needed to fo the conversion (not all of the extra modding).  I would guess this project could be completed in a matter of hours, not days or weeks.
  • xfaega

    1 Rookie

    •

    191 Posts

    1430

    0

    Posted May 19th, 2008 00:00

    The tray is still out of stock.  I email the seller but they haven't responded back yet.  Until then I will have all the cutting done.  It doesn't look to hard.  Just have to be patient.
  • pointguard1122

    1891 Posts

    1430

    0

    Posted May 19th, 2008 14:00

    You might want to check SilverPCs for the mobo tray. 

     

    http://www.silverpcs.com/product_info.php?products_id=181&osCsid=1c8b21d91f8395bd299cd028e7626af2

     

    This is the one I am using.

  • Davet50

    6 Operator

    •

    14442 Posts

    498

    0

    Posted May 19th, 2008 16:00

    is that a direct fit or is some cutting of the back panel necessary..