
UNSOLVED
Audigy 2ZS
I recently got a Dimension 9100.
I am having trouble with the Audigy2ZS sound card. I get no sound from the speakers when I play an Audio CD with the Audigy 2ZS (WDM) drivers installed from the disk I got with my Dell 9100. I did get the normal sounds Windows makes when the OS starts coming out of the speakers.
I called Dell about this and they sent me a new card. I installed the card in the same slot. Still has the same problem. No speaker output when audio CDs are played.
I tried uninstalling and reinstalling the Audigy drivers several times using the Audigy disk I got from Dell. No luck.
When I have the Audigy (WDM) (no ZS2, maybe the Windows driver???) drivers installed, I get sound when I play an audio CD, but I don't have access to the Audigy 2ZS utilities.
Any Ideas?
Message Edited by Da Doctor on 07-19-2005 11:48 AM
Responses (6)
Solutions (0)
I tried all the things suggested. Still have the same problem. Windows sounds come out of the speakers but I can't get the Audio CDs to play with the 2ZS driver. CD Audio will play when I have the Audigy 2 (WDM) (not the 2ZS) driver installed.
I spent 2 1/2 hours with a Dell tech last yesterday. He could not figure out the problem. I had to direct him to the BIOS to make certain integrated sound was turned off. After all that time, he basically said I was out of luck. He said this is a software issue and I would have to call their applications people @ $40 per incident.
Welcome to Dell, huh!
DELL- Sreenath
168 Posts
297
0
Posted July 20th, 2005 15:00
Try this, go to the device manager, uninstall the sound card, restart the computer, it will give you a message saying new hardware found. Insert the soundblaster cd in the drive, click on next and let windows search for the drivers. If it does not work, try the following link.
I figured it out. It was the cable that connects the headphones to the soundcard. I disconnected the cable from the sound card and the CD and DVD audio works.
I'll call Dell and see if they will send out a tech with another cable.
Shoddy workmanship, lousy tech support. As big a Dell is, they won't be in business much longer if they keep this up. Award winning service, what a laugh
The only saving factor is this forum.
Da Doctor

fireberd
11 Legend
•
33399 Posts
•
112848 Points
297
0
Posted July 19th, 2005 17:00
First, you need the Dell drivers to get all the fuctions out of the card since it's a custom Dell OEM version (and the generic Windows drivers can cause other problems).
There are several areas to check. The first and most obvious is to make sure the CD/DVD audio is not muted and/or the volume control slider is not down (off) in the volume control panel.
Second, make sure "use digital audio" is checked for each drive in the Windows Device Manager - all XP systems use "digital" audio (via the IDE ribbon I/O cable) rather than the older analog audio throiugh a separate cable to the sound card.
Third, check the Sounds and Audio Devices panel in the Control Panel. There are options to select the source for each sound type. Make sure the Audigy 2ZS is selected as the source for all sound types.