UNSOLVED

u237c

updated

2 years ago

U

u237c

1 Rookie

•

3 Posts

•

2 Points

0

720

April 3rd, 2025 20:13

Latitude 5450 - second SSD in the WWAN slot

Hello!

After upgrading the primary SSD to a larger one, I noticed that the motherboard has connectors for optional components, and I can't leave them unused.

According to the documentation, there are two options for WWAN: 4G USB and 5G PCIe 3 cards for the M.2 slot (https://www.dell.com/support/manuals/en-uk/latitude-14-5450-laptop/latitude-5450-owners-manual/wwan-module?guid=guid-428d5c47-93c5-4b5b-bd98-37a26cdb1a8e&lang=en-us)

The M.2 slot is B-keyed, so I purchased an adapter to connect an original M-keyed PCIe 4x4 SSD. PCIe SSDs are backwards compatible - they're just slower when running in older modes.
I came across another post (https://www.reddit.com/r/Dell/comments/186yed9/second_ssd_in_wwan_slot_working/) and the OP uses the same adapter (the blue one) where the OP used the same adapter (the blue one) with a PCIe 4x4 SSD.

My BIOS recognized a device in the WWAN slot and displayed an option to enable or disable WWAN in the "Communication" menu, but the PCIe/USB WWAN Bus mode selection option is missing.

After booting into the OS, the SSD is not visible in the Device Manager.

I tested the SSD using a USB B+M-keyed SSD reader, both directly and with the adapter, and it worked fine.

Do you have any ideas about this?

Is the BIOS lacking the PCIe/USB selection option because it cannot detect the module correctly, or does it automatically select the right communication interface?