
UNSOLVED
A
Astrosnail
3 Posts
0
195
January 17th, 2021 08:00
Latitude 3540 - ePSA HDD check
Good day,
I have a Latitude 3540 laptop with original SATA 2.5" Thin Laptop SHDD Seagate 500GB. It sadly failed and I bought a new one - Seagate Barracuda 1TB. Both have 5400 rotation speed.
When I check BIOS the new HDD is detected (unlike the failed one), but when I run diagnostics (F12), the new disk is not checked, instead the test skipped and "NA" is displayed as the test result. After other tests finish, ePSA reports no problems.
When I insert another Seagate disks, like another SHDD 500GB, or an old Seagate HDD 120GB, ePSA runs HDD tests for both.
What could be the reason of skipping this test for Barracuda 1TB? I thought that it may be a different specification, but 120GB one gets tested. Size? Anything else about Barracuda drive? The disk is fully operational, but I'd like to have a tool to test it.
I just updated my BIOS from A08 to A14, but ePSA still does not test the 1TB HDD. Could not find anything similar on the Internet either.
Many thanks in advance.
Responses (0)
Solutions (0)
