UNSOLVED

DC_Dan

updated

7 years ago

D

DC_Dan

2 Posts

0

843

April 28th, 2020 08:00

Dell 7390 and WD19 or WD19TB dock support for Dual UHD Displays (by any means)

I've been struggling with an issue for the past year with my Dell 7390 2-in-1.  I wanted to use my Dell with a Dual UHD displays. I was eager to test a new WD19 dock with two DP connections and the monitor lid closed.  I connected two Dell U3818DW monitors via both DP connections and found that I had UHD for Display 1 and HD for Display 2.

I also suffered the issue of displays periodically turning off.  This was a bizarre experience, and it only happened with the Dell dock, not my other computers, so the monitors are not at fault.

Through trial and error, the only stable (doesn't turn off) way I can use two UHD displays is connecting the USB-C port on the WD-19 dock to the USB-C port on Display 1, and the HDMI port on the 7390 itself to Display 2. This provides 3840x1600 59HZ 6-bit SDR for Display 1 and 3840x1600 39Hz 8-bit SDR 

If I try to connect a second UHD display *also* from the dock, one of the two dock connected displays gets set to HD resolution.

So my question has to do with WD19TB and data bandwidth.  Will a WD19TB, if TB services are enabled on the laptop, enable the dock to support two UHD displays?  (preferably using both DP dock ports)

 

No Responses