Inspiron 5570, runs hot, plastic film blocking air intake
Dear Dell Support Team, I recently purchased a dell inspiron 5570 core i5 8250u with radeon 530. I noticed it gets hot and the fan are very noisy when playing games. i'm on latest bios 1.1.6.
Being an IT technician I decided to upgrade the RAM modules today and while working inside the laptop I noticed that on the inside of the air intake vent located on the bottom of the laptop has a transparent plastic film sticked on top of the dust filter thus completely blocking the air intake at the bottom of the laptop.
So my question, Is that transparent plastic film normally supposed to be glued on top of the dust filter?
Should I remove the plastic film? Was it unintentionally left on the assembly line? Will removing it improve airflow inside the laptop?
Hi Jesse L, that's what I thought removing it will allow proper airflow to the fan. Note that the plastic film is on the inside of the laptop. I mean the other side of the air vent so i will need to remove the bottom cover to remove it from the dust filter. I hope that my laptop is an isolated case if not other inspiron 5570 may be experiencing overheating issues. Sincerely Nirmal.
Hi Jesse L ...here's what I just did with my dell laptop.. I removed the plastic film inside the laptop. I will be testing it for several hours I hope it helps cool down the laptop during heavy usage. Please pass this message to the engineering team.
Finally I had to put back the plastic film as It was making the laptop more noisier and much hotter with temperatures nearing 95-99degrees Celsius for CPU/GPU during heavy usage as both share the same heat sink. The air intake at the bottom of the laptop is a dummy and it will make the laptop hotter if the plastic film is removed so using a laptop cooling pad is useless for this model as It will only cool the bottom cover not the inside. It cost me nearly $1000 USD.. a laptop this expensive should have a better thermal design. This is very capable laptop but it's actual thermal design will most likely turn it into a barbeque.
Thank you for your message. I will be glad to assist you on this & escalate this to our product team.
For my reference, please click on the message tab next to your avatar– click “New Message” & search for my Dell username (Dell-Sreejith R) & send a private message with the service tag, registered name & email address.
Hey i found a fix for the overheating problem. Due to the lack of a proper thermal design of the laptop I have to disable intel turbo boost in bios. The laptop runs much cooler at 1.6ghz instead of 3.4ghz turbo boost and the radeon 530 performance maxed out as a result I saw increased fps in games like NFS Payback 1080p medium settings, Far cry 5 totally playable in 1080p normal settings, Watchdogs 2 1080p low settings and fifa18 1080p high settings. I saw earlier that the intel turbo boost was throttling the cpu and gpu due to really high temperature of over 90 - 99 degrees celcius under heavy usage and disabling it greatly improved performance even at 1.6Ghz the laptop is reasonably fast for my needs, runs cooler and is much silent. i'm using current radeon driver 18.7.1
Hi, I turned off Intel TurboBoost, but I tried some other games and the game was totally suffering with FPS Drop due to 1.6GHz CPU speed tho it ran quieter and cooler but the performance is dumped down.
My specs are the same as yours but with 4GB of RAM and AMD Radeon 530 2GB of GDDR5 VRAM.
I replaced the stock Dell thermal paste for intel CPU/AMD GPU with Coolermaster Master Gel Maker.. When i did the stress test prime95 my cpu max temp with Intel turbo boost enabled was 76 degrees celcius at maximum 100% cpu usage instead of usual 99 degrees celcius when it had the Dell thermal paste on. If you know how to repaste the thermal paste you can do it yourself or else get a qualified technician do it for you. just so that you don't mess up with warranty etc.. The drop in temp and increase in performance was worth it. At idle the temp is now 44-46 degrees celcius.. else I was getting up to 70degrees at idle with the stock thermal paste.
I forgot to mention.. if you are casually running games on this dell laptop.. you should at least have 8gb ram installed else it will lag even at lowest setting.. I also swapped the 1tb hard drive for an ssd.
Nirmalr7
1 Rookie
•
17 Posts
12135
1
Posted July 10th, 2018 09:00
Hi Jesse L, that's what I thought removing it will allow proper airflow to the fan. Note that the plastic film is on the inside of the laptop. I mean the other side of the air vent so i will need to remove the bottom cover to remove it from the dust filter. I hope that my laptop is an isolated case if not other inspiron 5570 may be experiencing overheating issues. Sincerely Nirmal.