UNSOLVED

stemplar444

updated

12 years ago

S

stemplar444

1 Rookie

•

14 Posts

0

20477

February 23rd, 2015 00:00

OME 2.0.1, Power-On with IPMI (no key) fails with cygwin error

I'm getting frustrated with OME. Every (basic) function I try, ends up in a long exercise troubleshooting the cause for it. Far too many protocols and ports in use for my taste.

Anyhow, my latest issue, in case somebody else runs into it as well.

I'm using the Sample Task 'Power on' and let it run against 4x M520 with latest and greatest iDRAC. IPMI is now enabled without key (even though it's everything but clear that this is a prepreq for this task).

The DELL Troubleshooting tool is happy with my IPMI settings, and I also downloaded the separate tool BMC to connect to (troubleshooting). That was a mistake. That installs an old version (7.3 instead of 8.0 in my case) of ipmitool.exe without any warning. The result is following:


Ausgabe von Befehl (stderr): 2 [main) ipmitool 1788 findjast_cwd: WARNING: Couldn’t compute FAST_CWD pointer. Please report this problem I
the public mailing list cygwin@cygwin.com
Error: Unable to establish IPMI v2 / RMCP+ session
Unable to set Chassis Power Control to Up/On

After removing the wrong BMC I can now get to the DRAC without key. The challenge with the key is not yet solved.

P.S. I'm not a fan of German Error messages, but OME is 'super intelligent' and of course needs to translate certain things to my keyboard language (no OS or User Language !)

 

  • DELL-Rob C

    4 Apprentice

    •

    2843 Posts

    808

    0

    Posted February 24th, 2015 11:00

    Ok,

    We need to ensure you are using the ipmitool that shipped with OME.  If an older one was installed, that might be causing some trouble.  Can you call support at 800-945-3355 to ensure the ipmitools are installed correctly?

    Thanks much,

    Rob

  • stemplar444

    1 Rookie

    •

    14 Posts

    808

    0

    Posted February 25th, 2015 00:00

    Hi Rob,

    As mentioned in the original post, this was more for the community and google, in case they run into the same scenario. I have removed the old version 7.3 and run OME 2.0.1 installer afterwards. This the installed the current BMC/IPMItool (8.0) in the prerequisite installer. This one does not report a Cygwin error anymore.

    So I do not have any issue anymore, as long as I'm not using an IPMI key. But that is a different thread.

    -Simon

     

  • DELL-Rob C

    4 Apprentice

    •

    2843 Posts

    808

    0

    Posted February 25th, 2015 06:00

    Ok Simon,

    Thanks for the clarification.  I'll take a look at the other thread.

    Regards,

    Rob