Any interop configuration should be first checked with the EMC Support Matrix / Elab Navigator to ensure it is supported. Unfortunately I'm not sure exactly what the SAN-OS version you are using as you stated it is 3.1.2(3a). If your configuration is EMC supported, I would recommend using any of the noted configuration settings as noted in both the Support Matrix and the Topology Guide.
If you are still having a problem, I'd recommend opening a case with support and provide a full set of logs from both switches.
It sounds like you currently have a case opened with EMC support. I'd recommend working with them to resolve your issue as it is not possible on these Forums.
I am trying to do the same thing with the same model siwthces and cannot get it to work either, getting a elpfailureinvalidflowctlparam on the mds 9509
ConnectrixHelpe
259 Posts
349
0
Posted October 30th, 2007 07:00
Any interop configuration should be first checked with the EMC Support Matrix / Elab Navigator to ensure it is supported. Unfortunately I'm not sure exactly what the SAN-OS version you are using as you stated it is 3.1.2(3a). If your configuration is EMC supported, I would recommend using any of the noted configuration settings as noted in both the Support Matrix and the Topology Guide.
If you are still having a problem, I'd recommend opening a case with support and provide a full set of logs from both switches.
Thank you.