UNSOLVED

ironcheflouie

updated

16 years ago

0

1161

May 13th, 2011 13:00

Raid 5 MetaLUNs

Hi all.

I had to re-deploy a CX3-80, who was just upgraded to the latest Flare populated with ~ 130 x 300 FC 15k drives. I have nothing connected to it yet.

To maximize the capacity (this is for DR only), I want to create Raid 5 MetaLUNs. I've done that before but only for a quick fix for something else. I want to do this for 70% of the storage and the rest R10 for DB logs, etc.

Who's done this before?

I have yet to plan this out yet but would like to create my RG either 4+1 or even 7+1 and stripe across buses. I read somewhere 4+1 is the sweet spot BUT 7+1 is probably what I would rather do (greedy ;-))

Can't they just offer R 50 :-)

Any helpful tips or comments will be appreciated.

Thanks

  • 584

    0

    Posted May 14th, 2011 02:00

    Use CLARiiON Capacity calculator from EMC Service partner web

    a 300gb hdd will give only 268 usable space in clariion

    and for the better performance bind meta lun from different bus.

    dont put more than 8-9 disk in one R5 raide groups

    create 2-3 global HS also

  • jps00

    2 Intern

    •

    392 Posts

    584

    0

    Posted May 16th, 2011 04:00

    The whitepaper EMC CLARiiON MetaLUNs -- A Detailed Review remains the best source on Meta information.  There is also a section on MetaLUNs in EMC CLARiiON Best Practices for Performance and Availability, FLARE Rev. 28.0. that may be helpful.    In addition, in Best Practices there is a discussion on the performance differences between RAID group configurations.  Read-up on 'Stripe Size', and know your workload's I/O block size.

    Both MetaLUNs and Best Practices are available on Powerlink.

  • 584

    0

    Posted May 16th, 2011 06:00

    Hi JPS00.

    Flare 28 on a CX3? Isn't the highest 26?

    Thanks

  • 584

    0

    Posted May 16th, 2011 06:00

    Thanks for all the comments.

    RRR, if you are referring to my original question, I was only stating 300GB as marketing GB, not engineering GB.

  • RRR

    6 Operator

    •

    5739 Posts

    584

    0

    Posted May 16th, 2011 06:00

    First of all you're saying 300GB is more than 268GB. Let me say that you're not seeing it entirely clear:

    300 GB = 300,000,000,000 bytes

    1 Clariion sector = 520 bytes instead of the usual 512 bytes

    1 GB = 1 GiB / 1.024

    1 GiB = 1024 x 1024 x 1024 bytes

    300 GB = (300,000,000,000 / (1024 x 1024 x 1024)) x (512 / 520) = 275 GiB. For a CX4 each individual disk "looses" about 7GiB. This 7GiB is the only usable space you actually loose (plus 8 bytes per 512 bytes for the sector ECC bits), the rest is explainable with the GB to GiB conversion.

    GiB is since 10 years the only official way to count binary Gigabytes, therefor saying 1024x1024x1024 bytes !!!

    300GB = 275GiB in a Clariion. If this disk is a vault disk, you'll loose an extra 62GB per disk because of the vault space.

  • jps00

    2 Intern

    •

    392 Posts

    584

    0

    Posted May 16th, 2011 07:00

    MetaLUNs did not change between the CX3 and CX4.  The write-up in the later versions of Best Practices is likely better.

  • RRR

    6 Operator

    •

    5739 Posts

    584

    0

    Posted May 16th, 2011 07:00

    1.024 GB = 1 GiB, this has nothing to do with marketing or engineering.

    I could sell you a car which is 13 feet long while it's also 4 meters long. Both are the same, but 13 is more than 4, so is my commercial 13 feet car longer than my engineering 4 meters long car ? Both are the same !!

  • SKT2

    2 Intern

    •

    1340 Posts

    584

    0

    Posted June 16th, 2011 18:00

    you are  my favourite RRR

  • RRR

    6 Operator

    •

    5739 Posts

    584

    0

    Posted June 17th, 2011 05:00

    hahaha, thanks !