It would depend on your workload. You need to understand the IOPs or bandwidth directed at the DAEs RAID groups and when the loads apply to decide.
If I was simultaneously running a high bandwidth workload to the SATA drives and a high IOPS workload to the FC drives, I'd use Option 1.
If I was using the SATA drives for off-hours backup and running a high IOPS workload on the FC drives, I'd use option 2.
A detailed discussion of 'bus balancing' is found in the 'CLARiiON Performance' section of the EMC CLARiiON Storage System Fundamentals for Performance and Availability. In addition, the 'RAID group bus balancing' section of EMC CLARiiON Best Practices for Performance and Availability contains additional CX4-related information. Both of these documents are available on Powerlink.
jps00
2 Intern
•
392 Posts
785
1
Posted August 11th, 2010 04:00
It would depend on your workload. You need to understand the IOPs or bandwidth directed at the DAEs RAID groups and when the loads apply to decide.
If I was simultaneously running a high bandwidth workload to the SATA drives and a high IOPS workload to the FC drives, I'd use Option 1.
If I was using the SATA drives for off-hours backup and running a high IOPS workload on the FC drives, I'd use option 2.
A detailed discussion of 'bus balancing' is found in the 'CLARiiON Performance' section of the EMC CLARiiON Storage System Fundamentals for Performance and Availability. In addition, the 'RAID group bus balancing' section of EMC CLARiiON Best Practices for Performance and Availability contains additional CX4-related information. Both of these documents are available on Powerlink.