FC630 QLogic 577xx/578xx 10 Gb Ethernet BCM57840 Dell customized cd esxi 6.5u3
fails to load FCOE adapter
Repurposing FX2 with x4 FC630 blades from a VMware 6.7u1 environment to a 6.5u3 environment. Using esxi custom images from Dell support website. No issue with 6.7u1 but unable to see QLogic Corporation FCoE Adapters with 6.5u3 image. Tried earlier versions, same issue. The Network side of the cna card works showing QLogic 57840 10 Gigabit Ethernet Adapter. Is there a particular release of driver for the FC630 that is buried at vmware's compatibility matrix that I'm missing or is it a version issue with the blades firmware.
I used the following driver download from vmware: QLogic-Network-iSCSI-FCoE-v60.713.78-14040859
Here is the Dell Custom cd version I used: VMware-VMvisor-Installer-6.5.0.update03-13932383.x86_64-DellEMC_Customized-A00.iso
Here is the inventory for the blade:
Integrated Dell Remote Access Controller 2.60.60.60 CMC 2.10.200.201804033862 QLogic 577xx/578xx 10 Gb Ethernet BCM57840 - B4:E1:0F:92:09:A1 14.07.06 QLogic 577xx/578xx 10 Gb Ethernet BCM57840 - B4:E1:0F:92:09:A4 14.07.06 QLogic 577xx/578xx 10 Gb Ethernet BCM57840 - B4:E1:0F:92:0A:75 14.07.06 QLogic 577xx/578xx 10 Gb Ethernet BCM57840 - B4:E1:0F:92:0A:78 14.07.06 BIOS 2.8.0 PERC H730 Mini 25.5.4.0006 Disk 0 in Backplane 1 of Integrated RAID Controller 1 D416 Disk 1 in Backplane 1 of Integrated RAID Controller 1 D416 BP13G+ 0:1 2.25 Lifecycle Controller 2.60.60.60 Dell 32 Bit uEFI Diagnostics, version 4239, 4239A36, 4239.44 4239A36 Dell OS Driver Pack, 15.10.02, A00 15.10.02 OS COLLECTOR 1.1, OSC_1.1, A00 OSC_1.1 System CPLD 1.0.5
Any help would be appreciated, thank you for your time;
I looked at the release notes for each of the two customized .ISO files and they're using the same drivers. You might try updating the firmware, it looks like version 14.10.07 is available. Flashing the NIC firmware is the place I would start. I'd go ahead and flash the BIOS and iDRAc as well, but I don't think they're causing the issue with the adapter.
These cards are very flaky in that if the firmware patch does not go smoothly, it will brick the nic mez card. I've had several just **bleep** out. If the esxi installs are older, 5.5, 6.0, and 6.5 why would upgrading the nic firmware resolve the issue. I would assume the older versions of esxi would be able to run on the older versions of the firmware of the fcoe. Flashing the nic will be my last option, will try a few more installs of different versions and different drivers. Thank you for the quick response.
I've ran through my options and failed. I have updated one of the blades with the following: Platform Specific Bootable ISO, PEFC630 19.07.00. It updated the firmware, including the mezzanine cna card to 14.10.07. I tried three different vmware esxi 6.5 update3 revisions A00, A01, and and 6.5 update2 A07. No luck.
I've run out of options on this and will probably look for an alternate course of action. I truly hate running into situations like this where a simple process that should have taken minutes ran into days without a solution.
If anyone runs across a solution, please let me know. I'll attempt to find alternate hardware to install 6.5 to use as a migration hop from 5.5 to 6.7 so I can continue to use this hardware. Dell people, if you get a spare moment, pass it to the appropriate group that tests drivers and releases for this hardware and product. Thank you.
Dell-DylanJ
6 Operator
•
2924 Posts
7390
0
Posted September 18th, 2019 11:00
I looked at the release notes for each of the two customized .ISO files and they're using the same drivers. You might try updating the firmware, it looks like version 14.10.07 is available. Flashing the NIC firmware is the place I would start. I'd go ahead and flash the BIOS and iDRAc as well, but I don't think they're causing the issue with the adapter.