A while back I was trying to fix my laptop, and got the motherboard and CPU working when I found out my GPU was not working. I finally found one a 680m to put in it from a 675m, I didn't need anything overly powerful since I wanted to fix up my laptop for traveling. I got a used one from eBay, (seller had 100% positive with 72000+ reviews) and it is giving me an issue I cannot find an answer to, so I was hoping you guys could help me again with this project.
The laptop works fine without the dedicated GPU in it, I installed the new GPU, and it it seemed like it still worked, but booted up using the integrated. When I use the fn command to switch to the dedicated, it starts up, all the lights turn on, but the screen is blank, the backlight is on, but nothing on the screen, and after a bit I hear the windows login sound, so it seems like it is running.
I have tried to connect an external monitor and it says no signal, in both VGA and HDMI. I have tried restarting it multiple times, always with the same result. I took out the CMOS battery and held the power button, then it starts up using the integrated GPU again so I can see the screen. In the boot menu I go to the startup and I see the NVIDIA in the dedicated spot, so it seems to know it is there, but in the device manager it does not show up.
I am not really sure what to do now, if the GPU I got needs returned, if I am missing something obvious, or am missing a step in getting the new GPU working.
I think you need a new GPU and run an ePSA by clicking F12 on restart and running the diagnostics.
*NOTE: I am NOT a Dell employee, But I am a Community Rockstar*
Quick Tip: If your laptop has voltage / charging issues, try shutting it down, unplugging power from laptop, hold power button down for 30 seconds to do a full reset!
I ran the diagnostics, and it did not show anything, and the problem still persists. The problem is a bad GPU? I will have to return it then, and hope I can find another one, thanks for the confirmation.
If you can see the card in the BIOS but not Device Manager then the chances are that the card is faulty. You could also try using NVflash to flash a new vBIOS to the card. It's possible that the card was previously used in a laptop that isn't compatible with Dell so a new vBIOS could fix this.
I have a bunch of faulty GPU's and most of them show in the BIOS so my gut feeling is that the card is dead.
I don't know how to flash the GPU, and I feel like I am trying too hard to get this old thing running again, I think something might be loose because the screen goes all weird with a lot of different colored lines and crashes if I move it too much, like moving it from one table to another, then moving the screen and for some reason some keys don't work until a little bit of time passes. I am returning the GPU, and would like to find another one to get that would hopefully work, but I am not sure if it is worth it anymore, unless you know of a good repair service for them that won't cost as much as the thing cost to buy?
Are you in the US? If you were in Australia I'd be happy to take a look.
If you took it to a PC repairer it may not be worth the cost. It would be better to look into it yourself and see how you go. If the screen is doing that weird thing even if there is no GPU installed then yeah you may have an LCD issue. Just make sure the connector is seated properly and you haven't crimped the cables.
If you're feeling brave you can also remove the LCD lid to check the cables in there. It isn't too hard and only requires removing two screws (from memory) once you remove the display assembly from the main part of the laptop.
The keyboard issue is strange. Maybe the ribbon cable needs to be reseated but it could need a new one. English keyboards for these are getting harder to find though.
I am in the US, I will have to take the whole thing apart again and check the cables, I will look into another GPU, hopefully I can get a good one, never ending problems with this thing
It can be frustrating messing around with these laptops the first time but stick with it and you'll end up learning a lot about what makes it tick. I have pulled apart lots of them and made lots of mistakes in the process.
If you do decide to remove the LCD back cover, just be careful with the LCD connector. I was drunk one night a few weeks ago trying to swap a 1600x900 display with a 1920x1080 and I tried to pull the LCD connector up to remove it but it slides out sideways. I pulled the connector straight off the LCD board and now it's just scrap.
I know the screens can be difficult, I hope it is just a loose wire, only happens sometimes, but I am wondering what GPU to look for, I mostly want this laptop working so I can play games and use my drafting programs while travelling.
Well if you just have the standard 60Hz display then the 980M is the way to go but if you have the 120Hz 3D display then I'd suggest a 1060 or 1070. It all depends on your budget.
A51-06
7 Practitioner
•
3094 Posts
•
13670 Points
905
1
Posted August 21st, 2020 20:00
I think you need a new GPU and run an ePSA by clicking F12 on restart and running the diagnostics.
*NOTE: I am NOT a Dell employee, But I am a Community Rockstar*
Quick Tip: If your laptop has voltage / charging issues, try shutting it down, unplugging power from laptop, hold power button down for 30 seconds to do a full reset!