UNSOLVED

Codybeasley

updated

28 days ago

C

Codybeasley

1 Rookie

•

5 Posts

•

16 Points

0

120

October 4th, 2026 14:10

Dell Denying Warranty on 6 Month Old Alienware...GPU Failure Called “Customer Damage”

We are a small church that purchased an Alienware desktop a little over six months ago for our sound/video system. It was a significant purchase for us, and unfortunately, we are now having an issue getting Dell to honor the warranty on what we believe may be a hardware failure.

 

The problem originally was not isolated to the HDMI port. When the computer first failed, our HDMI connected displays were not working, and the monitor connected through DisplayPort also would not display or be recognized. The computer was also producing a 3 amber / 2 white diagnostic flash sequence. We contacted Dell and went through their troubleshooting process. We removed and reseated the original RTX 5060 Ti, tested multiple known-working HDMI cables, ran Dell diagnostics, and, at Dell’s request, installed an alternate known, working GPU. The computer worked with the alternate GPU. Later, the original RTX 5060 Ti began outputting through DisplayPort again, but HDMI remained nonfunctional. Dell requested a photograph of the HDMI port. Based on that photograph and its Visual Verification Tool, Dell determined that the HDMI connector is misaligned and shows signs of “forceful connection and disconnection.” They have therefore classified the issue as customer-induced physical damage and denied warranty coverage. I will attach a photo of the HDMI (which seems in perfect shape to me) once attachments are enabled (hopefully).

 

Here is where we are struggling with that conclusion...

The HDMI cable was never disconnected between the last time the computer worked properly and the next time we used it and discovered the failure. The computer remained installed in the same location with the cable connected. Dell has since stated that the failure is “strictly isolated” to the HDMI connector. However, that does not account for the fact that DisplayPort also failed when the problem originally occurred, or that the computer was producing a 3 amber / 2 white diagnostic sequence at that time. I have repeatedly asked Dell to clarify what the 3 amber / 2 white diagnostic code means specifically for this Alienware model and whether that code and the original DisplayPort failure were considered when determining this was customer-induced damage. I have also requested escalation to a supervisor/warranty specialist but haven't received a response yet. We completely understand that a warranty should not cover damage actually caused by a customer. We are not asking Dell to cover damage that we caused. We are disputing the determination that customer-caused damage is what caused this failure in the first place. We are a small church that went out on a limb to purchase a computer of this caliber because we rely on it for our weekly services. To have it develop this problem just over six months later, and then be told the repair isn’t covered, is extremely disappointing.

 

I’m posting here in hopes that a Dell representative can take another look at the complete troubleshooting history or even offer some guidance on how to proceed, rather than only the photograph of the HDMI connector, and help us determine a fair resolution.

 

<To protect you, your private information was removed from public view. All private data was saved to your private Case. DELL-Admin>

(edited)

  • anne_droid

    6 Operator

    •

    2631 Posts

    •

    9681 Points

    1

    0

    Posted October 4th, 2026 22:14

    Hi

     

    Please can you confirm the Make Model and OS, along with any configuration details like touch screen, backlit keyboard, SFF or tower etc etc.

     

    The code could indicate the following...

     

    The 3‑amber / 2‑white pattern on Alienware is a pre‑boot diagnostic blink code meaning “BIOS recovery image not found” (BIOS Recovery 1).dell+3

    In practice this shows up as:

    • Power LED blinks amber 3 times, pauses, then white 2 times, repeats.

    • No POST / no display, often after a failed BIOS update, corrupted BIOS chip, or bad CMOS/RTC state.

    ########################

     

    Maybe this is helpful???????????????????????????

     

    Quick power/CMOS reset (often needed before BIOS recovery)

    Do this first; it clears residual charge and can restore a usable BIOS state.

     

    Desktop (Aurora / Area‑51 type):

    1. Unplug mains lead from the wall/PSU.

    2. Hold power button 20–30 seconds.

    3. Open case, disconnect CMOS battery for 2–5 minutes, then reconnect.
      (If you’re comfortable, also reseat RAM and GPU while in there.)

    4. Reconnect mains, try to power on and watch the blink code.

     

     

    NB: I may be wrong.

      Kind Regards  

                                         

      anne_droid

     

    User uploaded image

     

  • bradthetechnut

    9 Technologist

    •

    9712 Posts

    •

    40924 Points

    11

    0

    Posted October 5th, 2026 02:51

    "...installed an alternate known, working GPU. The computer worked with the alternate GPU. Later, the original RTX 5060 Ti began outputting through DisplayPort again..."

     

    Were both GPU's in it at once?  Try it with just the alternate GPU if you still have it, or try replacing the GPU all together.  I know, the last part probably isn't the answer you're looking for.

     

    @DELL-ChrisM2  Can anything be done to assist with a warranty claim?  Not sure if there's much you can see on your end.

  • DELL-Daniel V

    Community Manager

    •

    914 Posts

    •

    5244 Points

    12

    0

    Posted October 9th, 2026 20:55

    Attachments have been restored. Can you share another clear picture of your HDMI ports? Please confirm your system model as well.

    DELL-Daniel V
    #IWork4Dell
    Digital Support Forum Liaison

    New to Community? Check our FAQ!

  • Codybeasley

    1 Rookie

    •

    5 Posts

    •

    16 Points

    11

    1

    Posted October 18th, 2026 13:10

    @DELL-Daniel V​ Did the picture come through?

  • bradthetechnut

    9 Technologist

    •

    9712 Posts

    •

    40924 Points

    6

    0

    Posted October 19th, 2026 20:03

    @Codybeasley​  No photo seen yet.  Please don't forget to confirm system model.