Fixes:
- Fixed the issue where the XMP Memory profile selected as XMP1 or XMP2 in the BIOS setup menu automatically changes to Disabled after system reboot.
- Fixed the issue where the system displays memory failure error code 2000-0122 in Enhanced Pre-Boot System Assessment (ePSA) diagnostics.
- Fixed the issue where the system displays a black screen after the Alienware logo is displayed while booting on 4 K monitors.
- Fixed the issue where an error message is displayed while running high-load applications on systems with 11th generation Intel processors (Rocket Lake-S).
Enhancements:
- Added Dell Support Assist | Pre-Boot System Performance Check warning message that is displayed while booting after Real Time Clock (RTC) reset.
Hi! Rabbitdude. Intentional design or carelessness it does not matter, in my opinion. In any case, Dell put a motherboard in the R12 that only offer Gear 2 while also only supporting ram speed up to 3400 Mhz.
Gear 2 normally only improve performance when used with ram kit running at 4000 Mhz and beyond. Because of how Gear 2 operates it negatively impact performance when paired with Ram running at speed lower than 4000 Mhz.
In contrast, Gear 1 offers significant performance gain over Gear 2 when used with ram kit running at the speed supported by the R12 (3200 and 3400 Mhz).
It remains that currently R12’s users are dealing with stuttering and experiencing latency similar to computers who are now outdated by several generations.
Is Dell going to fix the issue with gear 2 on the R12? I agree, they probably will not. Should Dell fix the issue with Gear 2? Yes, I believe they should.
I agree with all your points. Just wanted you to know I was able to upgrade to 3600 g.skill ram. But my results are my own. It’s increased my speed a little bit l, and I obtained ram with better timings so it reduced my latency. Hope that helps any r12 owners. The PC has been working great since I made the change. No complaints.
Note: I don’t participate in e-sports and I don’t use VR (yet).
I doubt they care to fix it now that the R13 is out. But I’ll be happy until the R15 or R17 most likely.
Rabbitdude
2 Intern
•
509 Posts
2356
2
Posted August 24th, 2021 15:00
Yep. No performance difference from 1.1.2, no problems though so far