UNSOLVED

D00dBr4h

updated

4 years ago

D

D00dBr4h

26 Posts

0

3267

October 24th, 2022 23:00

Aurora R10, no PBO features in BIOS 2.3.2?

My Alienware Aurora R10 Ryzen (build date May 2021) w/ a R7 5800 doesn't appear to have PBO support in the BIOS, when most users with later build date Aurora R10s with Ryzen 5000 series procs do. I'm running BIOS 2.3.2, and the only 'overclock feature' I seem to have is XMP. I've tested the CPU under load and I'm not boosting to the speeds PBO usually does on this chip.

Machine is air cooled currently, but I have an MH0HN inbound from Dell Australia. Will that unlock the extra features on the MOBO? Or is something beyond the BIOS out of date?

  • D00dBr4h

    26 Posts

    1599

    0

    Posted October 25th, 2022 01:00

    The other option is that maybe I'm just being dumb? In order to enable XMP, I have to check the box 'enable overclocking feature' --so does that mean that PBO is always enabled when running an XMP profile?

     

    I just don't actually see a setting for PBO --and I don't seem to be seeing the 4.8Ghz that PBO seems to achieve.

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    1590

    0

    Posted October 25th, 2022 04:00

    It's 4.6 Ghz boost, not 4.8 Ghz. 5800 OEM 

    That being said, I had the same issue on my 3700X on my R10. Never was able to see any PBO settings in the BIOS, while other users had PBO options listed in their BIOS.

     

    How high it can boost, and for how long it can boost, depends on thermals amongst other things.

    If it runs higher than 3.4 Ghz it is boosting.

     

  • D00dBr4h

    26 Posts

    1588

    0

    Posted October 25th, 2022 05:00

    Is that because your MOBO is Zen 2 or because Dell has some kind of dual MOBO arrangement they're not telling people about? My machine originally shipped with a 3060Ti (I got it open box with an OE 3080 last week and I am probably going to get the authorized reseller to exchange the GPU for a liquid cooled OE 3090) --so did my mid-spec GPU machine ship with a different, less OC friendly, MOBO?

     

    BTW from what I've seen the stock boost clock is 4.6 but with PBO on, it seems 4.8 is the norm. I'm hoping the MH0HN I have coming will help with boost clocks, but neither OC1 nor OC2 in AWCC does anything to the CPU. Likewise, I have zero OC controls in the BIOS even changing them out. I do have pretty good RAM control, and I've been able to get the voltage and timings stable above spec. Have basic GPU control in ACC but I cannot seem to be able to increase CPU speed at all even in the BIOS.

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    1578

    0

    Posted October 25th, 2022 07:00

    There's only 2 versions of the motherboard, you have the "second" version. I never figured out why it's not visible in the BIOS. If you use Ryzen Master you will be able to enable PBO that way.

    I am pretty sure a liquid cooled 3090 is not going to fit in that case. 

     

    The boost frequency is not the same across all models. The 5800 is limited to 4,600 Mhz maximum boost. It will not boost over that with PBO.

    There are no multiplier settings or anything like that in the BIOS, so Ryzen master is your friend.

  • D00dBr4h

    26 Posts

    1561

    0

    Posted October 25th, 2022 12:00

    Thanks for that. 

    Do settings saved in Ryzen master persist after reboot for you? I don’t much care if I set the OC in Windows or in the BIOS. I just want to set it up and leave it be. 

  • steadler

    2 Intern

    •

    210 Posts

    1557

    0

    Posted October 25th, 2022 13:00

    R10 gen1

    20221025_155309_Richtone(HDR)[1].JPG

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    1549

    0

    Posted October 25th, 2022 14:00

    Ryzen master settings do not persist after a reboot and they are not automatically applied at boot either.

  • D00dBr4h

    26 Posts

    1545

    0

    Posted October 25th, 2022 15:00

    Thanks again,

     

    Do I have the situation correctly:

     

    1) Every R10 Ryzen, should, in theory have at least minimal CPU controls in the BOIS.

    2) Some do, some do not. Which ones do and do not are somewhat random.

    3) Nobody really knows why and Dell hasn't been forthcoming on the issue.

     

    Thanks!

  • D00dBr4h

    26 Posts

    599

    0

    Posted October 25th, 2022 16:00

    Thanks for that. I wonder if it’s an optional feature, but I guess we cannot know. I asked Dell but they wouldn’t tell me without charging me since I bought the unit open box with a warranty through the authorised reseller.


    One last question then:

     

    Is there anything that can be done to enable those settings in the BIOS or not?

     

    Thanks

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    1540

    0

    Posted October 25th, 2022 16:00

    1. Not necessarily, as in your case.

    2. That is correct. I never figured out or received an answer as to why exactly some do and some do not.

    3. Correct.