There are several other threads for problems upgrading to the latest BIOS 2.7.0 but my situation was a little different so I thought I would create a separate thread.
I am running Windows 10 on an XPS 8940 that was brought new around January 2021. I use Dell SA (SupportAssist) to update my system and have had no problems updating at any time since I received my Dell.
Yesterday I ran SA and it indicated that there was a new BIOS version available. I tried to install it but when Windows restarted, I got the message that the Firmware update failed, and Windows was rebooting. There was no error message or reason given as to why the update did not work.
I then used my computer normally for the day and turned it off last night.
This morning I tried again and again got the error.
I'm at a loss as to what to do or how to find out what is causing the problem. I am a little hesitant to download the file an apply it manually as I have never done that before and the possible problems that could be caused if something goes wrong.
Other threads had to do with operational freezing/Lock-up problems it appears.
The other person is from Brazil, and has a Brazilian Motherboard. Is your motherboard a US versions (run MSINFO32.exe and it will show the Motherboard and version)?
I once a while ago had Support Assist install a BIOS for me. BIG MISTAKE, it was messed up and I had to do a BIOS Recovery due to that.
I normally just D/L the file and execute it under Windows by double clicking on the file in Windows Explorer. It runs tand then requires a REBOOT to finish the install.
Alternatively, you can use a USB Flash driver to install the BIOS. Copy the file to the flash drive, power off the PC. Insert the USB drive and as the PC is powering up, press F12. You'll see Boot drive choices there and select the USB drive. The PC must be powered off, then the drive inserted, and then powered back on to see that choice to boot from.
It should then install, reboot possibly a few times, and then boot normally.
You can run MSINFO32.EXE to see if the new version was indeed installed.
@DavidC767 - If you're doing the update inside Windows, either manually or via SupportAssist, have you tried disabling your anti-viral app (eg, Windows Defender, McAfee, etc) before starting the update?
And don't forget to check that your anti-viral app is enabled again afterwards, regardless of whether the BIOS update succeeded or not...
I've pinged my Dell contacts with links to this and that other thread about the same issue with BIOS 2.7.0.
First, I am very cautious when it comes to BIOS updates. A failed BIOS update could break the CMOS leaving you with a dead motherboard. I NEVER install a BIOS update just because it is newer. I only install a BIOS update to correct an existing hardware issue. The BIOS 2.7.0 fixes only addressed security vulnerabilities CVE-2022-21166. It does not address a hardware fault. In my opinion, not needed.
Second, I never allow software (SupportAssist, Dell Update Application) to control BIOS updates. I do them manually to have full control.
Desktop BIOS installation instructions
* Download/Save the BIOS file to the Windows desktop * Turn the Desktop PC off * Disconnect all external (USB drives, printer, headset, USB sound devices, etc.) peripheral devices from the Desktop. Disconnect the wireless keyboard and mouse USB transmitter. Go wired. Leaving only the following devices and cables connected = Power cable Ethernet cable (if not using WiFi) Monitor video cable Wired USB mouse Wired USB keyboard * Turn the Desktop PC on * Close/end task all unnecessary software applications (Browsers, Dell SupportAssist, Dell Update Application, Dell Display Manager, Steam, Anti-virus, etc.) * Right click the saved BIOS file on the Windows desktop and choose, "Run as administrator". Note, you do not need to extract the file. Just run it * Follow the prompted instructions. The Desktop PC will reboot on its own. Do NOT force it to reboot or power off
I purchased the desktop directly from Dell and it was shipped to my address in the US, so I guess my motherboard is a US one.
I ran the MSINFO32 app but there was nothing about a Motherboard and version. The closest value that I saw were: BaseBoard Manufacturer (Dell Inc.), BaseBoard Product (0KV3RP) and BaseBoard Version (A00).
I then downloaded the file (from the Dell website) to a USB stick and followed your instructions. But again, the update failed. (To verify, I did power off the computer, turned it on and went to the F12 boot menu to browse to the USB stick and file.)
I did as you requested. My keyboard and mouse are already wired, and I don't have any peripherals attached directly to my desktop.
I used Task Manager to end some running apps that I thought might not be needed but it is hard to know what is really needed.
In any case, the update failed.
I really wish there was some type of error message. Without that, it's extremely hard to know what the problem might be and therefore what can be done to correct the problem.
You have supplied wonderful advice on the Dell forum for a long, long time--for me, my initial interaction with you concerned my (still-functioning) XPS 420! Probably 15 years ago...
My wife teaches yoga from home via Zoom...using an i5 XPS 8940 which is dedicated to that specific task.
I've been updating the machine using Support Assist without a problem for about six months now...but the BIOS 2.7 update broke the device until I rolled back the BIOS.
So there is something amiss here with the 8940 and 2.7...and I will no longer fiddle with the BIOS updates (per your suggestion above).
Hello, I see you are looking for technical assistance. If you need our help, you can start a private message with us and we will be happy to assist you.
Chris, I understand what you are saying, " I NEVER install a BIOS update just because it is newer. I only install a BIOS update to correct an existing hardware issue.".
I've rarely seen an update that has anything but CVE or Intel Security fixes. Almost ALL are marked URGENT though?
Are not Security Fixes something one should be concerned about? Is it necessary to research each CVE to figure out if one is affected? Does Dell even LIST when there is a true FIX, I can't recall seeing one?
Dell does not list known problems with the PC's either, nor what is fixed it seems. Support usually asks you to go to the latest BIOS as well.
Since many of us have the Nvidia problem, how are we to know when it is or is not fixed in an Update?
V2.4.0 broke users with Nvidia Discrete cards, but supposedly there were NO functional fixes in it :
===================================
Fixes & Enhancements
- Firmware updates to address the Intel Security Advisory INTEL-SA-00527 (CVE-2021-0091, CVE-2021-0107, CVE-2021-0103, CVE-2021-0111, CVE-2021-0114, CVE-2021-0115, CVE-2021-0116, CVE-2021-0117, CVE-2021-0118, CVE-2021-0119, CVE-2021-0124, CVE-2021-0125, CVE-2021-0156).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00532 (CVE-2021-0127). - Firmware updates to address security vulnerabilities. - Firmware updates to address the Intel Security Advisory INTEL-SA-00561 (CVE-2021-0145).
==================
Did one of the CVE's break it?
If only CVE's were in BIOS 2.4.0 how could it break a function?
Why would each BIOS since V2.4.0 change the problem for Nvidia owners as each release make the problem take longer to occur? Something had to change in those to make the problem change how often it happened?
Would it not be better to have a 'sticky' here with the subject of the Nvidia problems state Dell is working on it and once fixed, announce it?
Also, many vendors do not list the CVE's fixed, such as Netgear (Here) as it is an admission that there are ways to attack the system. Dell is basically telling bad guys that their PC's are open for attack as not everyone upgrades.
Some, such as Nvidia on the new firmware will even list Open Issues (Here, page 12 ) so a user can at least know something will not work well or not fixed?
I would always follow the vendors advice and update (note above some BIOS updates were marked Recommended, all others Urgent). Are you now saying they are not Urgent now?
I see V2.8.0 has now been released, only CVE fixes again, but I will get it in hopes it will fix the Nvidia problem.
DavidC767
6 Posts
1232
0
Posted July 8th, 2022 14:00
I just tried to update to 2.7.0 again and it is still failing (as expected).
I thank everyone who responded but as noted, none of the procedures worked.
My Dell is out-of-service so I will need to reinstate my service contract in order to get Dell to take a look at the situation.
The cost for service, plus the reinstate fee is way too much for this problem.
Therefore, I am not going to do anything at this time and hope that when 2.8.0 comes out that will solve the problem.