UNSOLVED

MarkvsK

updated

9 years ago

M

MarkvsK

1 Rookie

•

8 Posts

0

69894

February 7th, 2018 09:00

XPS 8930, memory upgrade from 16GB to 64GB

Hi - I would like to know what current memory is installed on my XPS 8930, I see its 16GB, but not sure it's in one single slot, (Dell says its max 4 x 16GB) if so what should I buy, there are so many possibilities;
DDR4 PC4-21300 • 16-18-18 • Unbuffered • NON-ECC • DDR4-2666 • 1.2V • Ballistix Sport • BLS16G4D26BFSC
DDR4 PC4-21300 • 16-18-18 • Unbuffered • NON-ECC • DDR4-2666 • 1.2V • Ballistix Sport • BLS16G4D26BFSB
DDR4 PC4-21300 • 16-18-18 • Unbuffered • NON-ECC • DDR4-2666 • 1.2V • Ballistix Sport • BLS16G4D26BFSE
DDR4 PC4-21300 • CL=19 • Single Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2666 • 1.2V • 1024Meg x 64 • Crucial • CT2K8G4DFS8266

(found on http://eu.crucial.com/eur/en/compatible-upgrade-for/Dell/xps-8930)

Would they all be compatible to whatever is on my system? Description says Installed Memory 16.0GB (15.8 GB Usable) but nothing to confirm its already just in one slot or 2 x 8GB (to determine how many new 16 GB sticks need to be purchased). Is there a Dell site which can provide this directly?

Many thanks in advance.

Mark

 

 

  • Jesse L (retired)

    10 Wizard

    •

    17898 Posts

    •

    69016 Points

    61707

    0

    Posted February 7th, 2018 09:00

    MarkvsK,

    Depending on the processor that is installed in your computer will determine the speed.

    Memory

    Table 1. Memory specifications
    Slots Four UDIMM slots
    Type DDR4
    Speed
    • Up to 2400 MHz: i3 processor
    • Up to 2666 MHz: i5/i7/i7k processors
    Configurations supported:  
      Per memory module slot 4 GB, 8 GB, and 16 GB
      Total memory 8 GB, 16 GB, 24 GB, 32 GB, and 64 GB

    The following table lists the available memory configuration matrix:

    Table 2. Memory configuration matrix
    Configuration Slot
    DIMM1 DIMM2 DIMM3 DIMM4
    8 GB 4 GB   4 GB  
    16 GB 8 GB   8 GB  
    24 GB 4 GB 4 GB 8 GB 8 GB
    32 GB 8 GB 8 GB 8 GB 8 GB
    64 GB 16 GB 16 GB 16 GB 16 GB

    Memory

    The XPS 8930 has four DIMM slots. Your computer supports 8 GB, 16 GB, 24 GB, 32 GB, and 64 GB UDIMM DDR4 memory (up to 2400 MHz for i3 processor and up to 2666 MHz for i5/i7/i7k processors).

    NOTE: Use slots DIMM1 and DMM3 if you need to use two memory modules

     

    Jesse L (retired)

  • MarkvsK

    1 Rookie

    •

    8 Posts

    61702

    0

    Posted February 7th, 2018 10:00

    Hi Jesse,

    Thanks for your prompt reply.

    I have an i7-8700 3.2GHz.

    Question though is there any way to check what's on there already. Do I have to open the box to check or is there a way I can check on the system description?

    I believe its 1x16gb but not entirely sure. Do the RAM sticks need to be the same or can I buy any on the list I mentioned above?

    Thanks again for your help.

    Best regards,

    Mark

     

  • Jesse L (retired)

    10 Wizard

    •

    17898 Posts

    •

    69016 Points

    61706

    1

    Posted February 7th, 2018 10:00

    MarkvsK,

    The memory has to be the same. You cannot mix different speeds of ram. You can open the system to look. You can look in the system Bios by starting the computer and tapping the F2 key. You can also click the link below to add your service tag, let the site detect your pc and click the configuration tab to see.

    Support.dell.com

     

    Jesse L (retired)

  • Vic384

    6 Operator

    •

    3161 Posts

    61699

    0

    Posted February 7th, 2018 11:00

    MarkvsK,

    You can download and install a program like CPU-Z from https://www.cpuid.com/ to determine exactly what is install in each memory slot. Go to the program's SPD tab and select the slot # and the memory size, max. bandwidth, manufacturer, part number, and serial number will be displayed. This information will help you determine what to purchase, but you need this information first.

  • MarkvsK

    1 Rookie

    •

    8 Posts

    61666

    0

    Posted February 8th, 2018 05:00

    Hi Jesse,

    Thanks for getting back to me and for the link,

    From the tag I found;

    Available Memory               52.19 %

    Page File Size                    24,194.8MB

    Available Page File            99.67 %

    Virtual Memory                  24,194.8MB

    Available Virtual Memory  58.27 %

    ChannelA-DIMM1              8,192.0MB

    ChannelB-DIMM1              8,192.0MB

    Does that mean I have 2x 8Gb?

    Unfortunately, it doesn't really say which stick(s) is(are) in there

    Best regards,

    Mark

     

  • MarkvsK

    1 Rookie

    •

    8 Posts

    61667

    0

    Posted February 8th, 2018 05:00

    Hi Vic,

    Thanks for the post:

    So I ran it and found;

    ON THE MEMORY TAB:

    Type: DDR4

    Channel #: Dual 

    Size: 16GBytes

    NB Frequency: 798.0 to 3000  MHz (moves around live)

    ON THE SPD TAB:

    Just Slot#1 with everything greyed out

    BUT ON THE AMAZING TXT REPORT I FOUND;

    Chipset
    -------------------------------------------------------------------------

    Northbridge Intel Coffee Lake rev. 07
    Southbridge Intel Z370 rev. 00
    Graphic Interface PCI-Express
    PCI-E Link Width x16
    PCI-E Max Link Width x16
    Memory Type DDR4
    Memory Size 16 GBytes
    Channels Dual
    Memory Frequency 1330.5 MHz (1:20)
    CAS# latency (CL) 19.0
    RAS# to CAS# delay (tRCD) 19
    RAS# Precharge (tRP) 19
    Cycle Time (tRAS) 43
    Row Refresh Cycle Time (tRFC) 467
    Command Rate (CR) 2T
    Uncore Frequency 2294.9 MHz
    Host Bridge 0x3EC2


    Memory SPD
    -------------------------------------------------------------------------

    DIMM # 1
    SMBus address 0x51
    Memory type DDR4
    Module format UDIMM
    Manufacturer (ID) Micron Technology (2C00000000000000000000)
    Size 8192 MBytes
    Max bandwidth DDR4-2666 (1333 MHz)
    Part number 8ATF1G64AZ-2G6H1
    Serial number 196A8E2B
    Manufacturing date Week 43/Year 17
    Nominal Voltage 1.20 Volts
    EPP no
    XMP no
    AMP no

    AND

    DIMM # 2
    SMBus address 0x53
    Memory type DDR4
    Module format UDIMM
    Manufacturer (ID) Micron Technology (2C00000000000000000000)
    Size 8192 MBytes
    Max bandwidth DDR4-2666 (1333 MHz)
    Part number 8ATF1G64AZ-2G6H1
    Serial number 196A8E09
    Manufacturing date Week 43/Year 17
    Nominal Voltage 1.20 Volts
    EPP no
    XMP no
    AMP no

    which unf would corroborate Jesse's tag as well!

    OMG, gonna have to buy 4 x 16gb its such a crazy cost!

    Any thanks for your precious help, really, to the both of you!

    Enjoy the day,

    Best regards,

    Mark

  • Koeven

    2 Intern

    •

    140 Posts

    61647

    1

    Posted February 8th, 2018 08:00

    Mine came with the same configuration, but I only needed to upgrade it to 32gb.  I bought Crucial memory and it worked perfectly in the other two slots.  Since you don't know if you really need 64gb, what about buying 2x16gb and putting those in the open slots and seeing how Excel runs with 48gb of memory, and then buy the other two if you find you really need them.  In looking Microsoft's Knowledge Base, I found this article that may help:

    https://support.microsoft.com/en-us/help/3160741/large-address-aware-capability-change-for-excel

  • MarkvsK

    1 Rookie

    •

    8 Posts

    61650

    0

    Posted February 8th, 2018 08:00

    Well spotted Vic,

    Indeedo its slot #2 and slot #4, both indicate;

    DDR4

    8192 MB

    max bandwidth DDR4-2666 (1333 MHz)

    Manufacturer: Micron Technology

    Part Number 8ATF1G64AZ-2G6H1

    Ranks single and serial

    So basically I have to buy another 4x 16gb to increase substantially my memory.

    The problem I have is Excel sends "Not enough system resources to display completely" on some of my sheets and crashes. I was surprised that 16Gb RAM was not enough, given that the same sheet runs fine on my old Precision T5500 which only has 12Gb...

    Not too sure what the issue might be, for all I know could be totally unrelated to RAM. 

    Thanks for your help!

    Best,

    Mark

  • Vic384

    6 Operator

    •

    3161 Posts

    61654

    0

    Posted February 8th, 2018 08:00

    MarkvsK,

    In CPU-Z, slot #1 is grayed out because there is no memory in that slot. If you had click on the drop-down arrow you could select another memory slot. You should see information in slots 2 and 4 and slot 3 should also be grayed out if your memory is install correctly according to Jesse's Table 2. 

  • MarkvsK

    1 Rookie

    •

    8 Posts

    10116

    0

    Posted February 8th, 2018 09:00

    Hey Koeven,

    Thanks for the post. I think you have to increase RAM with exactly the same sticks as you already have (as per Jesse's post above and XPS 8930 manual), so yes I could give 32Gb a shot, adding the two same 8Gb sticks.

    Unfortunately, we are still using Excel 2007, because of the VBA in there as well as an SQL interface which would both require some (heavy) additional programming.

    I wasn't at all aware of the 32bit vs 64 issue in old Excels. Odd though that it worked so well on the old machine (64bit Win7 w/12Gb) but not on the XPS 8930. At home, I have an XPS 8920 where the problematic sheet work fine on Win10 (except for copy paste which heats the CPU up and often freezes whatever is going on in the sheets).

    Never short of a problem with Excel... Thx for the Microsoft support link!

    Best,

    Mark