I am using an older XPS 8900 mobo for an unpaid build. It has an Intel i7-6700 3.4 GHz.
Everything is up and running fine but the fan is loud. So I took a look at the fan mounts and of course it has the Dell supersize holes and I don't have any backplates that fit this. Also, the CPU mount screws into the back bracket so if I replaced it then I would have to stick some nuts on the back of the board to hold the bracket in place?
Does anyone have any recommendations on a quiet cooler that works. Space is not an issue - it is in a large rack mount case. Thanks.
Keep in mind if you install a non-Dell fan, you're going to get a "Fan Failure" error every time you boot this PC. You can press F1 to continue, but that can get annoying...
And read this thread for a discussion of this exact topic.
I did the premium cooler upgrade to my 8950 and the thermals are awesome now. I found the fan that comes with the cooler a bit annoying, so I installed a Corsair ML 120 Pro. Thermals are even better and its whisper quiet.
A couple of follow-on questions. Thanks @RoHe I did see that other thread but it didn't conclusively answer the question about installing a third-party cooler. The idea above is nice as it uses a dell cooler.
Also, @billyjk - did the corsair require any mods to work with the Dell fan hook-up on the mobo?
Hey thanks for the advice - ordering from eBay now. I might get the Corsair as well and pop it in. The server sits behind me in my office and when it gets going the noise is a bit much.
The beauty of this cooler mod is that it all "just works". The Corsair is 100% BIOS-compliant, it's quieter, it moves more air at a given RPM, and it simply plugs directly into the mobo.
As I wrote in a post linked below, my Premium cooler came with a slightly bent copper heat tube as it exits the top of the cooler. This is of no consequence - unless you want to take the cooler apart, as the top plate on mine will not just lift off as it should once the screws are removed. So, my experience is likely to be a bit more involved than anyone else's experience. It was completely doable; it just took an extra minute or two.
Also, the Corsair has slightly wider pads on the corners of the fans to help with any vibration. The cooler is designed for the cheap fan that has no such pads. So, I just put a micro-smear of petroleum jelly on the pad contact points and it slid right in.
One more thing... the only Corsair fan that is BIOS-compliant is the Corsair ML 120 Pro Non-LED. Don't use any other variant. Unfortunately, this specific fan can be like hen's teeth to find. Sometimes they are for sale on Amazon, but then they will be out of stock for a while. I bought mine on eBay from two different sellers - one in France and one in Israel - so shipping time could be a thing.
redxps630
11 Legend
•
16431 Posts
•
83176 Points
517
0
Posted November 13th, 2022 16:00
Get the Dell premium tower cooler for XPS 8940 which will fit 8900 cpu socket like a glove. User has reported good performance and quiet operation.