UNSOLVED

GhostDragonOnline

updated

9 years ago

0

7261

May 17th, 2018 10:00

Wyse C10 LE firmware

Recently I updated the firmware for a C10LE to C10LE - 8.3_B011, the device was reboot and appeared to pull the new firmware with no issues. This morning when a user went to use the device it just had a black screen with a red X. We had the user reboot the device and try preforming a G Key reset but there was no change.C10LE.png

I attempted to downgrade to C10LE_8.1_027 but there was no change.

 

I had another terminal upgrade to C10LE - 8.3_B011 and did not have the issue but was not able to upgrade to C10LE - 8.3_B014.

 

Has anyone seen these issues with the C10LE firmware?

  • DELL-Josh Cr

    Community Manager

    •

    9801 Posts

    •

    45350 Points

    6628

    1

    Posted May 22nd, 2018 09:00

    Hi Ghost Dragon,

     

    no this is not a common problem.

     

    1.- Please update to the last available C10 Firmware: 8.3_109 Filename: C10_wnos from http://bit.ly/DellDigitalLocker

    2.- If the system is under warranty, test another Monitor + open a ticket here: https://techdirect.dell.com

  • Mikied78

    3 Posts

    6435

    0

    Posted June 25th, 2018 13:00

    I'm looking for the firmware you have for C10Le. Is it possible if you can send it to me?

  • andyant83

    3 Posts

    6332

    0

    Posted July 16th, 2018 05:00

    HI Josh,

    How do I get my Wyse purchases to appear in my digital locker?  I have Wyse branded C10LE devices.

  • RMontalvo

    2 Intern

    •

    560 Posts

    6324

    0

    Posted July 16th, 2018 11:00

    Andy,

    Wyse ThinOS requires that you have a Software Maintenance contract in order to gain access to the firmware files in the Digital Locker. Since the C10LE is 5 years past its EOL date, Software Maintenance is no longer available. You would need to contact tech support to see if they can provide it to you.