UNSOLVED

JorisL-2015

updated

11 years ago

J2

JorisL-2015

1 Rookie

•

63 Posts

0

24302

June 23rd, 2015 09:00

--Fixed-- Playing YouTube videos causes random RDP disconnects

--Fixed-- Playing YouTube videos causes random RDP disconnects

When playing YouTube videos from a D10D connected to W2K12 the session randomly disconnects. Sometimes just by going to the YouTube websites and sometimes during video playback. The ThinOS eventlog doesn't show any information about the disconnect.

  • lulin

    73 Posts

    2761

    0

    Posted June 23rd, 2015 09:00

    we did not meet the issue by using different on-line websites (youtube is blocked here)...i can transfer the issue to devs and ask them what kind of info they need to use for debug

  • JorisL-2015

    1 Rookie

    •

    63 Posts

    2767

    0

    Posted June 23rd, 2015 09:00

    ok thanks Lin

  • 2767

    0

    Posted June 24th, 2015 03:00

    I had same issue

    The error in the log was "RDP: Wrong fast-path packet!"

  • lulin

    73 Posts

    2767

    0

    Posted June 24th, 2015 04:00

    Quote Originally Posted by JorisL View Post

    John/Lin,

    I tested the Nasa site and got disconnected when maximizing the video. Capture and Wtos event log (that doesn't show any errors by the way) were send over e-mail. Tried to make a trace as well (had to disable NLA) but the RDP session is simply too slow to operate when tracing is enabled.

    you can select "no delay" to speed up (the default value is "short delay")

  • lulin

    73 Posts

    2767

    0

    Posted June 24th, 2015 04:00

    we need the trace file as well
    you can send it by mail if you get it

  • JorisL-2015

    1 Rookie

    •

    63 Posts

    2767

    0

    Posted June 24th, 2015 04:00

    John/Lin,

    I tested the Nasa site and got disconnected when maximizing the video. Capture and Wtos event log (that doesn't show any errors by the way) were send over e-mail. Tried to make a trace as well (had to disable NLA) but the RDP session is simply too slow to operate when tracing is enabled.

  • JohnAtkins

    129 Posts

    2767

    0

    Posted June 24th, 2015 04:00

    Quote Originally Posted by JLouis View Post

    The error in the log was "RDP: Wrong fast-path packet!"

    Thank you J Louis & Joris.

    Can you please test with any of the below web-sites and then reply back with your findings?
    Additionally if you are able to start a packet capture during triggering this disconnect would be very helpful.

    http://www.nasa.gov/multimedia/nasatv/index.html
    http://animal.discovery.com/tv-shows/tv-shows.htm
    http://us.battle.net/sc2/en/media/videos/#/1
    http://video.nationalgeographic.com/video/


    Thanks
    John

  • lulin

    73 Posts

    2767

    0

    Posted June 24th, 2015 04:00

    per dev, it will be fixed on the next build (after build 30)

  • JohnAtkins

    129 Posts

    413

    0

    Posted June 24th, 2015 08:00

    Thanks Joris.

    John

  • JorisL-2015

    1 Rookie

    •

    63 Posts

    2767

    0

    Posted June 24th, 2015 08:00

    thanks Lin